|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-02-2018, 02:14 PM | #1 |
Not Yet Wild
Join Date: May 2017
Posts: 35
|
Wheel question with lift
I am looking at a set of 14" M20 Kore wheels that are offered in a bolt pattern of 4x110 for my club car precedent 2014 electric with either a 6" all sports or madjax lift (Need to choose after a little more research..open to comments). My question is I know I will need a wheel adapter so the bolt pattern will be 4x4 but what offset would work best as its offered as a +0 or -52 when using an adaptor as the adaptors also look likes or acts like a spacer. I understand the -52 will bring the wheel "out" further so I would think a +0 would work. Anyone have this or know more. Below is what I am looking at. Thanks
Wheel: https://shop.wheelprospowersports.co...s/m20-kore-atv Adaptor: https://shop.wheelprospowersports.co...-wheel-adapter |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-02-2018, 02:48 PM | #2 |
never finished
Join Date: Oct 2016
Location: northeast ohio
Posts: 539
|
Re: Wheel question with lift
cool looking wheels. dont know enough about lifts to give a opinion. had to look up the offset to understand it the -52 comes out to about 2". i think you need to also factor in what tires you are going to use. if they bulge they may rub. i guess it depends if you like the wheels to look deep or not.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
lift and wheel spacer question | Electric Club Car | |||
Wheel/tire/lift question | Lifted Golf Carts | |||
Wheel and lift question | Electric EZGO | |||
Lift Question/ Wheel Replacement | Lifted Golf Carts | |||
got my lift now wheel and tire question | Lifted Golf Carts |