lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-08-2018, 01:55 PM   #11
Not Yet Wild
 
Join Date: Oct 2017
Posts: 16
Default Re: 2007 CC president not moving but clicking.

Quote:
Originally Posted by NoleFan4Ever View Post
Yes, it is a Sepex drive unit so you have the rocker switch (all the high power switching is done in the controller, not like Series that is through the FNR switch), run/tow switch, speed sensor, etc. If your rocker switch was bad, the solenoid would not have engaged

Do you get the reverse buzzer when you place it in reverse? Does it have resistance when you manually push or pull it? (Run/Tow switch must be in Run for this test.
Gotcha. I didn't think the Solenoid would work either if the rocker was bad. Yes I get the buzzer in reverse.

I will do the resistance test and the others a report right back.

Thanks!~
Mastiffman is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-08-2018, 02:11 PM   #12
Not Yet Wild
 
Join Date: Oct 2017
Posts: 16
Default Re: 2007 CC president not moving but clicking.

Quote:
Originally Posted by NoleFan4Ever View Post
Yes, it is a Sepex drive unit so you have the rocker switch (all the high power switching is done in the controller, not like Series that is through the FNR switch), run/tow switch, speed sensor, etc. If your rocker switch was bad, the solenoid would not have engaged

Do you get the reverse buzzer when you place it in reverse? Does it have resistance when you manually push or pull it? (Run/Tow switch must be in Run for this test.
Yes I get the buzzer in reverse.

I tested the resistance as you stated. Nothing.

Tested the Red to Green and Black to White, rear end lifted and no voltage at all.

Bad Controller right?
Mastiffman is offline   Reply With Quote
Unread 05-08-2018, 04:43 PM   #13
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 11,568
Default Re: 2007 CC president not moving but clicking.

Quote:
Originally Posted by Mastiffman View Post
-snip-
Bad Controller right?
Yes.... Sorry...

The MCOR past both microswitch and resistance tests, the solenoid test past, but the controller output to the motor did not..... So you have all the inputs, but no output.

Time for an XCT-300 if you are going to stay stock and want the best replacement, but if you are going to go bigger down the road, go ahead and get the XCT-500 and it can be programmed for your stock motor until you upgrade the other stuff.

Contact David Hicks for these https://www.revolutiongolfcars.com/a...ct-controllers or scottyb for these http://www.cartsunlimited.net/alltrax-xct-sepex--.html
NoleFan4Ever is offline   Reply With Quote
Unread 05-08-2018, 05:02 PM   #14
Not Yet Wild
 
Join Date: Oct 2017
Posts: 16
Default Re: 2007 CC president not moving but clicking.

NO worries. Thanks for the offer!

But this is my neighbors cart and they just use it for tooling around their cabin by the lake. So the stock Curtis 1510-5201 I will try and find used, rebuilt or inexpensive new one.

Thanks a ton for the help!
Mastiffman is offline   Reply With Quote
Unread 05-08-2018, 05:04 PM   #15
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 11,568
Default Re: 2007 CC president not moving but clicking.

You may find it used, but a new Curtis will be more than a new Alltrax....
NoleFan4Ever is offline   Reply With Quote
Unread 05-08-2018, 05:16 PM   #16
Not Yet Wild
 
Join Date: Oct 2017
Posts: 16
Default Re: 2007 CC president not moving but clicking.

Quote:
Originally Posted by NoleFan4Ever View Post
You may find it used, but a new Curtis will be more than a new Alltrax....
Thanks!

Are they a plug and play unit or is there rewiring that has to be done?
Mastiffman is offline   Reply With Quote
Unread 05-08-2018, 05:40 PM   #17
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 11,568
Default Re: 2007 CC president not moving but clicking.

Completely plug&play. And the 300 is capable of 350 amps, is completely use adjustable for speed, torque and many other settings thru the Alltrax Tool Kit and will allow you to troubleshoot future issues via the same program. They also give you an industry best 2 year warranty.
NoleFan4Ever is offline   Reply With Quote
Unread 05-08-2018, 06:18 PM   #18
Gone Wild
 
E36Racer's Avatar
Club Car
 
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,053
Default Re: 2004 CC DS not moving but clicking.

My neighbor just installed an Alltrax in his cart and has the stock Curtis and solenoid. If you want I can ask him for the model number. I think his cart is a 2009.


Sent from my iPhone using Tapatalk
E36Racer is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2007 president headlight problem Electric Club Car
1988? Club Car DS Clicking But Not Moving Electric Club Car
2007 G22 Starts moving then stops Electric Yamaha
Need Help on speed controller for 2007 Electric President Electric Club Car
solenoids clicking cart not moving Electric EZGO


All times are GMT -5. The time now is 02:21 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.