|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
07-08-2018, 08:21 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2011
Location: Spartanburg, SC
Posts: 4
|
XCT500 and Admiral A4 Installed Problem?
Installed XCT500, 400a solenoid, Admiral A4, 2 ga cables, and 6 new 8v Trojans in my 2007 Precedent with lift and 23" tires a few weeks ago. Completed the break in period for the new motor and batteries. The motor temp after a 4 mile WOT is about 140 degrees now. Is that too hot? The Alltrax has the torque map installed and speed limit set to 6000 rpms. Also while monitoring with my laptop on a ride I noticed that while running 24 mph (as fast as it will go) it shows that I am only turning 2200 rpms? That seems extremely low to me. Cart has factory gear ratio. Any help or experience with this setup will be greatly appreciated. Wondering if I possibly have a faulty speed sensor in motor, wiring issue, or programming issue.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2018, 08:59 PM
|
#2 |
|
Gone Wild
 Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: XCT500 and Admiral A4 Installed Problem?
What is the motor magnet pole count set to?
|
|
|
|
|
07-08-2018, 09:05 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2011
Location: Spartanburg, SC
Posts: 4
|
Re: XCT500 and Admiral A4 Installed Problem?
It is set to 8 pole.
|
|
|
|
|
07-08-2018, 09:12 PM
|
#4 |
|
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: XCT500 and Admiral A4 Installed Problem?
I think all aftermarket motors are 4 pole.
|
|
|
|
|
07-08-2018, 09:54 PM
|
#5 |
|
Not Yet Wild
Join Date: Mar 2011
Location: Spartanburg, SC
Posts: 4
|
Re: XCT500 and Admiral A4 Installed Problem?
I will try setting to 4 pole tomorrow and see if that corrects the rpm reading issue.
Thank you |
|
|
|
|
07-08-2018, 10:26 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: XCT500 and Admiral A4 Installed Problem?
4 pole is correct for the Admiral motors.
 PS>> 140º case temperature is quite acceptable |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Admiral A2 motor with xct500 field map problem | Electric Club Car | |||
| New Admiral B2 "high speed" motor installed- no faster | Electric EZGO | |||
| New install on xct500 and admiral mot-a2 | Electric Club Car | |||
| Installed new cables...new problem | Electric Club Car | |||
| Got my new stuff installed...still got a problem somwhere. | Electric EZGO | |||
Linear Mode
