lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-21-2018, 02:41 PM   #1
Not Yet Wild
 
Join Date: Apr 2011
Posts: 16
Default Upgraded F/R Switch

After the problems I had last weekend the kind people on this forum were able to help me diagnose my burned out F/R switch on my 97 DS. I have since gotten an upgraded switch.

I installed the switch last night and the cart is still a no go. Pack voltage is well above 50v and each battery is around 8.4v so its not the batteries. Solenoid clicks when the pedal is pushed so Id doubt its the problem.

The microswitches that came with the unit were configured differently, so I removed them and replaced with the existing ones after determining they each passed a continuity test.

I think my problem is with the wiring of the actual switch. Per the attached wiring diagram I should have a wire to the side lug labeled M1 going to the controller. The issue is that the old switch did not have this wire.

Any thoughts on how to get this thing up and running again?
Attached Images
File Type: jpeg ED642A69-E1FF-4E35-9D90-EAEFA99BB5BE.jpeg (65.2 KB, 0 views)
gregahamilton is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-21-2018, 02:45 PM   #2
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 67,690
Default Re: Upgraded F/R Switch

Pictured is a CU 48v CC F&R switch.

The micro switches are the same as on a 48v CC.

Is the cart 36 or 48 volts?
scottyb is online now   Reply With Quote
Unread 07-21-2018, 03:02 PM   #3
Not Yet Wild
 
Join Date: Apr 2011
Posts: 16
Default Re: Upgraded F/R Switch

48v Series
gregahamilton is offline   Reply With Quote
Unread 07-21-2018, 03:05 PM   #4
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 67,690
Default Re: Upgraded F/R Switch

The micro switches should have been the same. Where do the big cables on your switch go?
Should be motor S1 and S2 and what else?
scottyb is online now   Reply With Quote
Unread 07-21-2018, 03:17 PM   #5
Not Yet Wild
 
Join Date: Apr 2011
Posts: 16
Default Re: Upgraded F/R Switch

By big cables I assume those are the white and blue ones. Originally they went to posts on the switch on the side closest to the front and were inaccessible without removing the switch.

These cables are now attached to lugs on the bottom of the switch. White cable goes to A2 and blue goes to the M- lug on the controller. Hmmmm. Might have just answered the question?

BTW the smaller cables that rotate with the switch go to S1 (orange) and S2 (blue).
gregahamilton is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Upgraded F&R switch Electric Club Car
Got my 97 DS upgraded Electric Club Car
Upgraded EZ GO pds still will not run Electric EZGO
FS EZ=go/ upgraded Golf Carts and Parts
upgraded 36v to 48v Electric Club Car


All times are GMT -5. The time now is 10:29 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.