lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-03-2018, 03:30 PM   #1
Hit it like a champ
Gone Wild
 
Hit it like a champ's Avatar
Club Car
 
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
Default Cable install please help

Installing the new controller is a bit more complex than I thought. The controller part not so bad but the new battery cables came with 11 cables that’s 2 extra as far as I can see. Is it for the precedent with the onboard computer. Does anyone have pics of the cable install. It looks like the extra ones are very long. It came with a long red cable I assume it’s the positive to solenoid. And one small green cable about 5” long the other 9 are black all different sizes. Please help thanks Jerry
Hit it like a champ is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-03-2018, 03:40 PM   #2
E36Racer
Gone Wild
 
E36Racer's Avatar
Club Car
 
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
Default Cable install please help

11 is what you need if using the stud kit for the stock OBC. Otherwise you only need 10.

5-connect 6 batteries together in series
2-controller B+ and M- to motor A2 and A1 respectively
1-pack negative to controller B-
1-pack positive to solenoid big post
1-other solenoid big post to controller B+

If you have the OBC stud kit, the pack negative goes to one side of the stud and the 11th wire goes from the other side of the stud to the controller B-


Edit: the 2 extra long cables are probably the motor cables.
E36Racer is offline   Reply With Quote
Old 08-03-2018, 05:25 PM   #3
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: Cable install please help

And on all those black ones you are referring too, they should have color coordinated heat shrink or tape on them to match the color cable you are replacing...
NoleFan4Ever is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Yamaha G1 throttle cable install Gas Yamaha
F-n-R cable install on 2011 sport 2+2 gas Gas EZGO
battery cable install Electric EZGO
G22 accelerator cable install Gas Yamaha
G16 Accelerator Cable Install Gas Yamaha


All times are GMT -5. The time now is 07:15 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.