lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-29-2009, 10:32 PM   #1
Not Yet Wild
Club Car
 
Join Date: Mar 2009
Location: Clinton, MS
Posts: 11
Default 36 resistors to controller / pot box

I think i asked this before but being new i must have put it in the wrong place , i can't find it. Anyway, i have a 02 CC w/ resistor coils and V glide. I want to replace the resistors and V Glide w/ a PB-6 and Controller. For now i would like to keep it at 36 volts. I have a 0-5K 700 amp logisystems controller ( only 35.00 difference to step up from 450 amp) and potbox. Later i hope to add 2 batteries and go to 48. I need help with wiring of the solenoid, pot box and controller. i have diagrams of 36 volt w/ resisters but am still confused to all the connections. I have the pot box mounted but at full throttle it does not come back to the micro switch, and mounting in the other direction it doesn't rotate all the way. Can any one direct me to , or have any pictures or drawings.
boilermaker is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-29-2009, 11:19 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,053
Default Re: 36 resistors to controller / pot box

Hello. Logisystem makes a good product but they do not offer a 36-48v controller so I assume you are Stuck in 36v with that controller.
I have not been able to get enough action oout of the stock throttle rod to satisfy the throw needed on the PB-6. I always ended up making a little dude to multiply the action. This pic has a spring but later I went with a rod .SOmeone else recently went with an extension at the peddle, under the floor......hope this helps.
Attached Images
File Type: jpg IMG_0812.jpg (57.1 KB, 56 views)
scottyb is offline   Reply With Quote
Unread 03-31-2009, 07:20 AM   #3
Not Yet Wild
Club Car
 
Join Date: Mar 2009
Location: Clinton, MS
Posts: 11
Default Re: 36 resistors to controller / pot box

Thanks for the pic... I will try that.. Actually the label on the controller says 36 - 48 volt, 0 - 5K. I have been talking to robby at PQ who gave me advive on what needed to be replaced, but am searching for info or drawings as to the wiring of the PB, controller, and solenoid. I have drawings for the controller except fot wir's of the PB micro switch. It has 3 connectors tab on it.
boilermaker is offline   Reply With Quote
Unread 03-31-2009, 07:45 AM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,053
Default Re: 36 resistors to controller / pot box

I stand corrected......
The three PB-6 connections are
1.Common
2.Normally open
3.Normally closed
They are marked C NO NC
you will use the C and NC for the micro switch to power up the controller
I had to remove the micro to read these but I think you can do it with a simple voltmeter test......
If your drawings are from Logisystem they suck. Can you post what you have here?
scottyb is offline   Reply With Quote
Unread 04-01-2009, 02:25 PM   #5
Not Yet Wild
Club Car
 
Join Date: Mar 2009
Location: Clinton, MS
Posts: 11
Default Re: 36 resistors to controller / pot box

Not much on the controller directions ... only connection for motor to A2 to Lert f/R post that rotates. Which wires go to the 3 pins on the PB-6 and where do they go from there?
boilermaker is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Which Controller? Electric EZGO
92 E-Z-Go Resistors Gas EZGO
01/ v-glide/ resistors Electric Club Car
New controller and pot box ?? Electric EZGO
Melted resistors Electric EZGO


All times are GMT -5. The time now is 05:28 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.