|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-28-2018, 05:59 PM | #1 |
Not Yet Wild
Join Date: Sep 2018
Posts: 6
|
Alignment issues after installing lift
Hey guys. Have a 2007 Precedent and installed a Jakes 3” spindle lift. After the lift and new tires was installed it will not hold an alignment. It will align to specs but after a short ride both tires (especially the passenger side) will be toed out to the point it is not driveable. Any help would be greatly appreciated. Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-28-2018, 08:48 PM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Alignment issues after installing lift
Not familiar with this specific kit, but the Toe (measured across the front of the tires in comparison to the measurement across the rear) is adjusted by the tie-rod ends and will not change unless manually moved or they are worn out/loose/sloppy. Make sure all your bolting is tight and secured correctly.
Now the camber (measured across the top in comparison to the bottom) is notorious for being a pain.... |
10-28-2018, 10:15 PM | #3 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Alignment issues after installing lift
Sounds like something isn’t tight. Make sure the 4 bolts that go through the spindle to hold the tie plate on are TIGHT.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alignment/Camber issues | Electric EZGO | |||
Alignment issues | Electric Club Car | |||
Alignment issues or Rack & pinion??? | Lifted Golf Carts | |||
Alignment Issues | Electric Club Car | |||
Alignment Issues | Gas Yamaha |