lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-01-2018, 11:50 AM   #11
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,752
Default Re: First time Alltrax install..

Glad I could help
scottyb is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-01-2018, 01:27 PM   #12
Gone Wild
 
Join Date: Aug 2016
Posts: 508
Default Re: First time Alltrax install..

Couple things...first off this is a 14 non OBC Precedent. The blue bullet connector that connected from the main harness to the charging harness; does it need to be connected back? Next is the pink connector in the run/tow, small solenoid wire group; where does it need to be connected to if at all. Lastly does the black wire in the charging harness just need to be connected back to the main negative?


Sent from my iPhone using Tapatalk
twilliams81 is offline   Reply With Quote
Unread 11-01-2018, 01:44 PM   #13
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 7,541
Default Re: First time Alltrax install..

Yes, You need both.

The pink wire connects to the Solenoid big post on the battery side and provides power to the Controller and key switch.

The blue wire with bullet connector is the charger lockout signal to the Controller.
Sergio is online now   Reply With Quote
Unread 11-01-2018, 01:45 PM   #14
Gone Wild
 
Join Date: Aug 2016
Posts: 508
Default Re: First time Alltrax install..

Thank you...and the black connector goes straight to the main negative?


Sent from my iPhone using Tapatalk
twilliams81 is offline   Reply With Quote
Unread 11-01-2018, 01:50 PM   #15
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 7,541
Default Re: First time Alltrax install..

Quote:
Originally Posted by twilliams81 View Post
Thank you...and the black connector goes straight to the main negative?


Sent from my iPhone using Tapatalk
Yes (or Controller B-)
Sergio is online now   Reply With Quote
Unread 11-01-2018, 01:50 PM   #16
Gone Wild
 
Join Date: Aug 2016
Posts: 508
Default Re: First time Alltrax install..

10-4 thanks again Sergio you da man!


Sent from my iPhone using Tapatalk
twilliams81 is offline   Reply With Quote
Unread 11-01-2018, 04:03 PM   #17
Gone Wild
 
Join Date: Aug 2016
Posts: 508
Default Re: First time Alltrax install..

I believe I just about got everything wired right by I want to be absolutely certain on the diode situation. The first pic where the red circled part is my battery side of the solenoid. So is the way I have the diode in the 2nd picture correct?




Sent from my iPhone using Tapatalk
twilliams81 is offline   Reply With Quote
Unread 11-01-2018, 04:13 PM   #18
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 7,541
Default Re: First time Alltrax install..

The REGEN diode is correct on top of the Solenoid.

You are missing the small flyback diode on the Solenoid small posts.

The diode side with the stripe will go towards the light blue wire.

Just one more thing, there are two different ways to wire the F1 and F2 to make the cart go the correct direction as indicated by the FNR switch, but there are many incorrect diagrams produced by Alltrax:
Controller B+ to Motor A1 and Controller F1 to Motor F1
Controller B+ to Motor A2 and Controller F1 to Motor F2

If the cart does not move after you install everything, check the charger interlock setting in the Alltrax software:
Open the Alltrax Toolkit software and click on Tools then Options.

Make sure you have a checkmark on the "Show Charge Interlock".

Go to the "Controller Settings" Tab and scroll all the way to the bottom of that page.

Change the option: "Disable the Motor Controller when User3 is:" to "Floating/NC"

Click the "Set" button (on the left of the Program) to save the settings
Sergio is online now   Reply With Quote
Unread 11-01-2018, 04:37 PM   #19
Gone Wild
 
Join Date: Aug 2016
Posts: 508
Default Re: First time Alltrax install..

So I have my CONTROLLER B+ to my MOTOR A2. I would need to swap my CONTROLLER F1 to MOTOR F2 and CONTROLLER F2 to MOTOR F1?


Sent from my iPhone using Tapatalk
twilliams81 is offline   Reply With Quote
Unread 11-01-2018, 04:39 PM   #20
Gone Wild
 
Join Date: Aug 2016
Posts: 508
Default Re: First time Alltrax install..

Yes (about the diode). Scotty is gonna send me one but says it will run without it till then.


Sent from my iPhone using Tapatalk
twilliams81 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax controller installation time Electric Club Car
First time installing an Alltrax XCT 300 Controller Electric Club Car
Install time for Jake's Long Travel? Lifted Golf Carts
Trying to install a 12v Power Inverter fro one time use - Where to connect? Electric EZGO
Install time? Electric EZGO


All times are GMT -5. The time now is 06:04 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.