02-06-2019, 11:24 AM | #1 |
Not Yet Wild
Join Date: Jul 2016
Location: winston salem, nc
Posts: 65
|
Eride truck
Well I guess this is the best place to put this since it seems very close to a club car set up I have had in the past minus that it is 72volts. Bought the little truck and it was doing great. Went to pull it out of my garage yesterday and it was surging bad. Left it for a while and came back to see what it would do. Nothing, absolutely nothing. All that happens is a slight buzz from what seems to be the motor. So, what’s next? What do I check? Battery pack is good(reading 78volts). Thanks for the help
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-06-2019, 02:34 PM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Eride truck
How about the Year of it?
What controller is on it? Brand and model number? Have you made sure all of the battery terminals and cables are clean and tight? Motor studs and cables are clean and tight? Is it Series drive or Sepex? If it has a big FnR lever are the cables on the back tight? Are the contacts in the lever clean? |
02-06-2019, 03:03 PM | #3 |
Not Yet Wild
Join Date: Jul 2016
Location: winston salem, nc
Posts: 65
|
Eride truck
2008 exv2. Sepex controller. Cables are tight all around. I have tested the solenoid since it does not click, solenoid tested ok but I’m not getting voltage to it. It does not have the big f&r switch. It has the oic attached. Anyone know how to jump it to test it?
Sent from my iPhone using Tapatalk |
02-06-2019, 04:05 PM | #4 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Eride truck
Here are testing flow charts that should help identify the issue.
|
02-06-2019, 04:09 PM | #5 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Eride truck
Here is the Service Manual for future needs.....
|
02-06-2019, 07:44 PM | #6 |
Not Yet Wild
Join Date: Jul 2016
Location: winston salem, nc
Posts: 65
|
Re: Eride truck
Awesome, thank you very much
Sent from my iPhone using Tapatalk |
02-06-2019, 08:31 PM | #7 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Eride truck
We aim to please.....
|
02-07-2019, 10:02 AM | #8 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: Eride truck
How about a picture or two of your ride. I've never seen one of these.
|
02-11-2019, 06:08 AM | #9 |
Not Yet Wild
Join Date: Jul 2016
Location: winston salem, nc
Posts: 65
|
Re: Eride truck
My plan is to paint it up and make it look like a little battery humvee. I moved the solar panel to the roof because I did not like the look of it on the hood. Also, I found that my controller wasn’t sending 12 volts to my throttle sensor. I’m not really looking to spend 1k right now on a controller so I “added” 12 volts from the converter already on the rig and made it work. But I’m pretty sure my throttle position sensor on the pedal is bad since it is all or nothing. Just need to do some more testing since I have been out of town. They use the same sensor as some of the big Mack and international trucks, haha go figure Sent from my iPhone using Tapatalk |
02-11-2019, 11:42 AM | #10 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Eride truck
Do you see a part number on the TPS?
Alot of automotive style TPS are designed to work on 5v. What voltage was your controller sending to it? That thing would look sweet painted up like a military Humvee with some knobby mud tires! Kinda looks like it could use some helper springs in the back too. |
|
|
Similar Threads | ||||
Thread | Forum | |||
ez go rat truck? | Electric EZGO | |||
Truck/search Light mounts to top of truck, cart, or ATV | Autos/Side x Sides/ATVs/4x4's | |||
Kei truck | Gas golf carts |