Alltrax xct throttle calibration

bmarv · 02-23-2019, 07:24 PM

I just got my controller installed and I'm having issues with my throttle. Cart is in my sig. MCOR4 conversion has been done and throttle worked fine before the swap. Now when I watch the throttle on the monitor page, it's showing 100% at hardly any pedal. I can't find where on the alltrax software to do a throttle learn. It will drive but only if I just lightly press the throttle.

bmarv · 02-23-2019, 07:26 PM

Looking at it now my throttle is actually working backwards. When it is on the floor it is showing 0% and when barely pressed it shows 100%

WalterM6 · 02-23-2019, 07:30 PM

What throttle do you have selected in the software. It should be MCOR 5k-0 ohms.

beachguysc · 02-23-2019, 07:32 PM

Quote:

Originally Posted by bmarv

I just got my controller installed and I'm having issues with my throttle. Cart is in my sig. MCOR4 conversion has been done and throttle worked fine before the swap. Now when I watch the throttle on the monitor page, it's showing 100% at hardly any pedal. I can't find where on the alltrax software to do a throttle learn. It will drive but only if I just lightly press the throttle.

I had something similar with Alltrax and new mcor 4. . Sergio’s advice in this thread worked for me.
Alltrax 400 Throttle/pedal issues.

bmarv · 02-23-2019, 07:45 PM

Quote:

Originally Posted by beachguysc

I had something similar with Alltrax and new mcor 4. . Sergio’s advice in this thread worked for me.
Alltrax 400 Throttle/pedal issues.

I just went through your thread. Clearing the autocal worked for me. Everything is now kosher!

Time to see what speeds i can get

02-23-2019, 07:24 PM	#1
bmarv Not Yet Wild Join Date: Oct 2018 Location: Charleston, SC Posts: 29	Alltrax xct throttle calibration I just got my controller installed and I'm having issues with my throttle. Cart is in my sig. MCOR4 conversion has been done and throttle worked fine before the swap. Now when I watch the throttle on the monitor page, it's showing 100% at hardly any pedal. I can't find where on the alltrax software to do a throttle learn. It will drive but only if I just lightly press the throttle.

02-23-2019, 07:26 PM	#2
bmarv Not Yet Wild Join Date: Oct 2018 Location: Charleston, SC Posts: 29	Re: Alltrax xct throttle calibration Looking at it now my throttle is actually working backwards. When it is on the floor it is showing 0% and when barely pressed it shows 100%

02-23-2019, 07:30 PM	#3
WalterM6 Gone Wild Join Date: Apr 2017 Posts: 1,226	Re: Alltrax xct throttle calibration What throttle do you have selected in the software. It should be MCOR 5k-0 ohms.
WalterM6 Gone Wild Join Date: Apr 2017 Posts: 1,226

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Calibration for Curtis Controller 2013 Precedent	Electric Club Car
calibration/test module adaptor	Electric Club Car
Clutch calibration	Big Block Talk!
SOC Calibration	Electric EZGO
Alltrax Throttle	Electric Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum