lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-30-2019, 12:23 PM   #1
Joshtwhit
Not Yet Wild
 
Joshtwhit's Avatar
Club Car
 
Join Date: May 2018
Location: North Florida
Posts: 11
Default Help! Alltrax XCT500 Precharge Error - New Install

2014 Club Car Precedent 48V w/ OBC


Hey y’all! Long time lurker here who finally got the courage to do some mods on my Precedent.

So I just finished installing the Alltrax XCT48500-IQ with upgraded 400a solenoid and 2g wire all ordered from Scotty over at cartsunlimited. I bought an Admiral a4 as well but I haven’t installed that yet. So as of right now I’m running the stock AMD motor.

I finished the install last night and drove the cart around for a few test runs, and everything seemed to be running great. I came in and plugged it in for the night. The next morning I care out to go for a ride and I’m getting nothing. I plugged in my laptop to find that the controller is throwing a precharge error. And the 1 green 6 red flashing confirmed that. Pack voltage is steady at 50.9

I sent Scotty an email but figured I’d post here as well. Does anyone have any thoughts as to what is wrong and how I should go about troubleshooting?
Joshtwhit is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-30-2019, 07:00 PM   #2
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: Help! Alltrax XCT500 Precharge Error - New Install

I had that happen a couple weeks ago. Made no sense. I cut it off, went back 10 mins later and blink codes for "Pre-Charge Failure". This is odd as the XCT its pre-charge controlled thru the Run/Tow switch. I cycled it a few times and still nothing. I powered everything down and still nothing. I verified current thru the Run/Tow and to the controller.

I just plugged it in, emailed Ron Manns at Alltrax and he told me check the Voltage Reducer if I installed one. The next day when I came out to check it, I unplugged it and it ran fine. Has never repeated, but Ron never told me what role the VR could or could not have played in this....
NoleFan4Ever is offline   Reply With Quote
Old 03-30-2019, 07:12 PM   #3
Joshtwhit
Not Yet Wild
 
Joshtwhit's Avatar
Club Car
 
Join Date: May 2018
Location: North Florida
Posts: 11
Default Re: Help! Alltrax XCT500 Precharge Error - New Install

So a little update:
I was testing all of my connections with a voltage meter. Can’t remember what I was testing when this happened but all of a sudden the solenoid clicked and the controller rebooted. Everything runs fine ever since that happened. Very strange. Maybe the solenoid was stuck? Maybe Scotty or David will have some thoughts.
Joshtwhit is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax XCT500 install question Electric EZGO
Xct500 controller error codes Electric EZGO
Alltrax Precharge Error Electric EZGO
Alltrax XCT500 Install on 2011 Club Car DS IQ Electric Club Car
Alltrax xct500 install help Electric Club Car


All times are GMT -5. The time now is 04:46 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.