Controller Wiring 2016 CC Precedent

FLBeachBum · 04-25-2019, 09:45 PM

Ok I know I did something wrong.

Probably to do with resistor and diode placement. Left side is from positive battery bank, right side is to controller. The long (top) came from Dave, the tiny/short (bottom) came with resistor. I still have stock one if needed.

Either this is wrong or the fuse is wrong (currently on negative) diagram shows it on positive.. not sure that mattered

NoleFan4Ever · 04-25-2019, 09:53 PM

The diode is backwards on the field coil. Look at this instruction http://www.buggiesgonewild.com/elect...ml#post1557532 from the Sticky's.

Blue wire is the Pos (+) activation wire and Blue w/White stripe is the Neg (-) activation wire. Banded/striped end of the diode should go towards the Pos activation wire.

If it were mine, I would leave the diode direction as is and swap the Blue and the Blue w/White stripe wires around. I like all my Pos's on one side....

FLBeachBum · 04-25-2019, 10:21 PM

Quote:

Originally Posted by NoleFan4Ever

The diode is backwards on the field coil. Look at this instruction http://www.buggiesgonewild.com/elect...ml#post1557532 from the Sticky's.

Blue wire is the Pos (+) activation wire and Blue w/White stripe is the Neg (-) activation wire. Banded/striped end of the diode should go towards the Pos activation wire.

If it were mine, I would leave the diode direction as is and swap the Blue and the Blue w/White stripe wires around. I like all my Pos's on one side....

THANK YOU! I was trying to figure it out for like 2 hrs... Wow this thing scoots 25mph but accel is stupid lol

NoleFan4Ever · 04-25-2019, 10:24 PM

Quote:

Originally Posted by FLBeachBum

THANK YOU! I was trying to figure it out for like 2 hrs... Wow this thing scoots 25mph but accel is stupid lol

Lol! Use your Alltrax Tool kit to tune the throttle and other settings to make it the most comfortable for your needs. By far the best controllers on the market right now....

Good Luck!

NoleFan4Ever · 04-25-2019, 10:32 PM

And BTW, you do not have your cables quite oriented the way you should on the controller side large post. You want the highest amperage cable (largest size) on the bottom which places it in direct contact with the solenoid. Then the others will go one top of it. The way you have it now could cause it to come loose, create heat, or lose contact.

FLBeachBum · 04-25-2019, 10:33 PM

Quote:

Originally Posted by NoleFan4Ever

Lol! Use your Alltrax Tool kit to tune the throttle and other settings to make it the most comfortable for your needs. By far the best controllers on the market right now....

Good Luck!

That's on my to do for tomorrow! Thanks for posting the sticky thread, I read it like 5 times before the install and knew there were two diodes. Guess I just miss read light blue as white/blue lol

I will post some pics once I get closer to finishing everything up

FLBeachBum · 04-25-2019, 10:35 PM

Quote:

Originally Posted by NoleFan4Ever

And BTW, you do not have your cables quite oriented the way you should on the controller side large post. You want the highest amperage cable (largest size) on the bottom which places it in direct contact with the solenoid. Then the others will go one top of it. The way you have it now could cause it to come loose, create heat, or lose contact.

Got it, I will swap it tomorrow as well. Thanks for the tip

TahoeDawgZ71 · 04-26-2019, 06:36 PM

Thanks for the text earlier. Glad you got it going. And NoleFan4ever, thank you for helping my customers on BGW during the day while I'm at the shop building golf cars. It's greatly appreciated.

NoleFan4Ever · 04-26-2019, 09:37 PM

Quote:

Originally Posted by TahoeDawgZ71

-snip-
And NoleFan4ever, thank you for helping my customers on BGW during the day while I'm at the shop building golf cars. It's greatly appreciated.

Tahoe, it is an honor to help out, but more importantly, thank you for being who you are and what you are to all these great members we have here!

04-25-2019, 09:53 PM	#2
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: Controller Wiring 2016 CC Precedent The diode is backwards on the field coil. Look at this instruction http://www.buggiesgonewild.com/elect...ml#post1557532 from the Sticky's. Blue wire is the Pos (+) activation wire and Blue w/White stripe is the Neg (-) activation wire. Banded/striped end of the diode should go towards the Pos activation wire. If it were mine, I would leave the diode direction as is and swap the Blue and the Blue w/White stripe wires around. I like all my Pos's on one side....

04-25-2019, 10:32 PM	#5
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: Controller Wiring 2016 CC Precedent And BTW, you do not have your cables quite oriented the way you should on the controller side large post. You want the highest amperage cable (largest size) on the bottom which places it in direct contact with the solenoid. Then the others will go one top of it. The way you have it now could cause it to come loose, create heat, or lose contact.

04-26-2019, 06:36 PM	#8
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Controller Wiring 2016 CC Precedent Thanks for the text earlier. Glad you got it going. And NoleFan4ever, thank you for helping my customers on BGW during the day while I'm at the shop building golf cars. It's greatly appreciated.

Similar Threads
Thread	Forum
2016 CC motor & controller	Golf Carts and Parts
2016 Precedent	Electric Club Car
2016 Club Car Precedent Subaru Wiring Diagram	Gas Club Car
2016 CC Precedent radio wiring	Electric Club Car
2016 EZGO Valor wiring	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum