lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-14-2019, 08:25 PM   #11
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 121
Default Re: Alltrax XCT Programming

I have been waiting, it even says settings have been sent to the controller, but no rpm change.

Sent from my SM-G950U using Tapatalk
scmoose is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-14-2019, 08:26 PM   #12
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 121
Default Re: Alltrax XCT Programming

When I exit the program, then open it back up, it defaults to the normal setting, not the user 1 setting I saved.

Sent from my SM-G950U using Tapatalk
scmoose is offline   Reply With Quote
Unread 05-14-2019, 08:34 PM   #13
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 121
Default Re: Alltrax XCT Programming

With these settings, watching the monitor tab while driving the cart, the rpm gets up to 5800, cart is hauling tale. Controller setting is in dual switch mode, user 1.

Sent from my SM-G950U using Tapatalk
scmoose is offline   Reply With Quote
Unread 05-14-2019, 09:05 PM   #14
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 6,995
Default Re: Alltrax XCT Programming

scmoose, those TABS (Normal, User 1 and User 2) is how You program the different profiles, but You need an external switch like the ones sold by Alltrax or You can build a simple ON-OFF-ON in order to change which profile the Controller is using.
https://alltraxinc.com/fn-function-control-box/
Sergio is offline   Reply With Quote
Unread 05-15-2019, 03:21 AM   #15
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 121
Default Re: Alltrax XCT Programming

Well hell I thought I could switch them within the program until I got an external switch going. What ever I program the normal mode to should work though. I will change the rpm on the normal tab and see if that works.

Sent from my SM-G950U using Tapatalk
scmoose is offline   Reply With Quote
Unread 05-15-2019, 06:12 AM   #16
Gone Wild
 
BBBHC's Avatar
Club Car
 
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,248
Default Re: Alltrax XCT Programming

Quote:
Originally Posted by scmoose View Post
Well hell I thought I could switch them within the program until I got an external switch going. What ever I program the normal mode to should work though. I will change the rpm on the normal tab and see if that works.

Sent from my SM-G950U using Tapatalk
I had thought the same thing. I just recently went through all of this on my build. Yes, whatever you program the normal mode to will work. Here is a tool on here http://www.buggiesgonewild.com/speed-calculator.php you can use to figure out what RPM will equate to what speed. It's found in the tool bar, under quick links. For your gear ratio, if you have the stock rear end, it is about 12.3. That's not exact, but it's close enough to get you a good estimate for what your speed will be at any RPM.

Quote:
Originally Posted by Sergio View Post
scmoose, those TABS (Normal, User 1 and User 2) is how You program the different profiles, but You need an external switch like the ones sold by Alltrax or You can build a simple ON-OFF-ON in order to change which profile the Controller is using.
https://alltraxinc.com/fn-function-control-box/
I went with the option of making my own function control switch. Sergio was one of the folks on here that helped me with my build. Here is a link to post #239 of my build where we start to discuss the switch: 92 CC DS gas, convert to lithium electric rebuild thread After a bit, it goes into some other topics, and picks back up around post #270 or so. Several folks chimed in with information and ideas that might be helpful for you.
BBBHC is offline   Reply With Quote
Unread 05-15-2019, 06:57 AM   #17
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 121
Default Re: Alltrax XCT Programming

Quote:
Originally Posted by BBBHC View Post
I had thought the same thing. I just recently went through all of this on my build. Yes, whatever you program the normal mode to will work. Here is a tool on here http://www.buggiesgonewild.com/speed-calculator.php you can use to figure out what RPM will equate to what speed. It's found in the tool bar, under quick links. For your gear ratio, if you have the stock rear end, it is about 12.3. That's not exact, but it's close enough to get you a good estimate for what your speed will be at any RPM.







I went with the option of making my own function control switch. Sergio was one of the folks on here that helped me with my build. Here is a link to post #239 of my build where we start to discuss the switch: 92 CC DS gas, convert to lithium electric rebuild thread After a bit, it goes into some other topics, and picks back up around post #270 or so. Several folks chimed in with information and ideas that might be helpful for you.
Cool thanks for the info.

Sent from my SM-G950U using Tapatalk
scmoose is offline   Reply With Quote
Unread 05-15-2019, 09:19 AM   #18
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,268
Default Re: Alltrax XCT Programming

The new FN-Key from Alltrax is priced right at $109 and you can lock the cart into any of 3 modes. Remember for those of you who are programming a lock-out mode to assign lockout to normal so that if somebody tries to disconnect or disable the mode switch it will default to the lockout in normal mode.
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
xct 500 alltrax programming how to Electric Yamaha
Alltrax programming Electric EZGO
Alltrax Programming Electric EZGO
alltrax programming Electric EZGO
Alltrax axe programming Electric EZGO


All times are GMT -5. The time now is 01:41 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.