lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-15-2019, 03:40 PM   #1
Not Yet Wild
 
Join Date: Oct 2016
Posts: 26
Default Precedent and TXT Voltage reducer install help

I am constantly having to "fix" my friends and neighbors golf carts. I have to install voltage reducers a lot! is there any wires that are keyed 48 volt in the battery tub area? I'd like to be able to wire it so it turns on with the key but not have to run a wire to the dash to the actual key switch.

Also same question for the ezgo txt.


Thanks
trippyork is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-16-2019, 07:53 AM   #2
Gone Wild
 
yawood's Avatar
Club Car
 
Join Date: Jan 2017
Location: Melbourne Australia
Posts: 867
Default Re: Precedent and TXT Voltage reducer install help

Quote:
Originally Posted by trippyork View Post
I am constantly having to "fix" my friends and neighbors golf carts. I have to install voltage reducers a lot! is there any wires that are keyed 48 volt in the battery tub area? I'd like to be able to wire it so it turns on with the key but not have to run a wire to the dash to the actual key switch.

Also same question for the ezgo txt.


Thanks
There should be some connections around the controller area, there are a number of people on this forum (Sergio, NoleFan4Ever, FairTax4Me to name a few) who could define it for you if they see this thread.

My only concern about your logic is that most of the 12V stuff is needed at the front so you're going to have to put wires through to the dash anyway - it's just a matter of deciding if they are 48V or 12V. The 48V ones are actually thinner and easier to fit in the channel than the 12V ones are.
yawood is online now   Reply With Quote
Unread 05-16-2019, 03:52 PM   #3
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 9,499
Default Re: Precedent and TXT Voltage reducer install help

Pin #10 (Tan) on the controller. is On/Off 48V + from the key switch. As for the E-Z-GO, it depends on the drive system on your cart. If it's a TXT48, it may be the same, as they also use a Curtis controller, same as the Precedent. An E-Z-Go guy would have to confirm the pinout. I'm not very fluent in speaking E-Z-Go.
TahoeDawgZ71 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Voltage Reducer - Install Question Electric Club Car
Precedent Light Kit Install w/ Voltage Reducer Electric Club Car
Voltage reducer install Electric Club Car
Where to install ScottyB voltage reducer on 2010 Precedent Electric Club Car


All times are GMT -5. The time now is 03:13 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.