48 to 12 volt reducer

scottieg82

I am in the process of converting my 4x12 to 6x8 and looking to see where everyone has their reducer mounted


Sent from my SM-N950U using Tapatalk

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

NoleFan4Ever

What model cart?

scottieg82

Sorry, 2007 precedent

Sent from my SM-N950U using Tapatalk

NoleFan4Ever

Are you installing an OEM or aftermarket?

scottieg82

Not sure, it doesnt have one now that I know of.

Sent from my SM-N950U using Tapatalk

NoleFan4Ever

This is an OEM 30a reducer and will fit your factory harness. https://www.revolutiongolfcars.com/p...-precedent-30a

Looksie here http://www.buggiesgonewild.com/elect...ml#post1536158

yawood

If you haven't got a reducer yet but are thinking of getting one then the one that Nole suggested is good. The reason for that is that it is a "five wire" reducer. The fifth wire is a trigger wire which can be connected to the "cold" side of the keyswitch so that the reducer only uses power when the key is on. If you buy a cheap four wire reducer you'll have the added expense, and wiring complication, of a relay to get it to work that way safely.

There are a few spots it will go on a precedent. One place that aftermarket ones are often put is on the flat steel plate behind the front suspension. It already has some convenient holes and also acts as a good heatsink. David at Revolution Golf Cars will also give you good advice on where the factory ones go and how they plug into the loom.

Good luck.

jim,s

I agree David is the way to go on this. David has helped me on 2 carts not only with the parts but the service for questions is second to none.

scottieg82

Thanks everyone, I might another battery.

Sent from my SM-N950U using Tapatalk