lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-02-2019, 10:20 AM   #1
Gone Wild
 
Hit it like a champ's Avatar
Club Car
 
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 379
Default FNKEY install on precedent

Ok I have been putting this off for a while now. I bought the alltrax FNKEY to pair with my xtc 500 controller my cart is a 2014 precedent the thing came with a 3 pin connector. Do I dust plug it in and use the tool kit to program the 3 key positions. I couldn’t find any videos on it. Any advice on installing it would be greatly appreciated.
Also i would like to make one of the key positions 10mph and have it set up maximum battery life.
Hit it like a champ is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-02-2019, 07:06 PM   #2
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 10,888
Default Re: FNKEY install on precedent

Yes, it plugs into your controller. The you use your tool kit to set up what each position does. It may look intimidating, but it is not. Easy Peasy....
NoleFan4Ever is offline   Reply With Quote
Unread 06-02-2019, 07:07 PM   #3
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 10,888
Default Re: FNKEY install on precedent

Quote:
Originally Posted by Hit it like a champ View Post
-snip- Also i would like to make one of the key positions 10mph and have it set up maximum battery life.
No real way to set speed per se, it is the RPM's that you will set down to a maximum number. Like 2500 rpm's to start with and adjust from there.
NoleFan4Ever is offline   Reply With Quote
Unread 06-03-2019, 09:14 AM   #4
Gone Wild
 
Hit it like a champ's Avatar
Club Car
 
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 379
Default Re: FNKEY install on precedent

Quote:
Originally Posted by NoleFan4Ever View Post
No real way to set speed per se, it is the RPM's that you will set down to a maximum number. Like 2500 rpm's to start with and adjust from there.
Could i turn down the amps and if i can should i turn down the armature or battery amps wouldn’t that save battery life.
Do i need to break the battery connection before installing.
Hit it like a champ is offline   Reply With Quote
Unread 06-03-2019, 10:39 AM   #5
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 10,888
Default Re: FNKEY install on precedent

You can and should turn down the amperage as if not, it is going to kick like a mule till it hits the designated RPM's.

No, you can go to Tow if you like but you are only plugging into the controller and not running any power supplies. The controller will actually supply the switch.
NoleFan4Ever is offline   Reply With Quote
Unread 06-03-2019, 09:23 PM   #6
Gone Wild
 
Hit it like a champ's Avatar
Club Car
 
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 379
Default Re: FNKEY install on precedent

I made this plate for it today. I guess i am ready to install. Does anyone know if I will loose my field map or will it pop up on all three settings and i change them each separately.
Attached Images
File Type: jpg 61AD2FA1-0C34-4416-882A-ADC13C9E441B.jpg (143.4 KB, 0 views)
Hit it like a champ is offline   Reply With Quote
Unread 06-04-2019, 05:28 AM   #7
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 6,866
Default Re: FNKEY install on precedent

The field map is not affected by the switch.

Just change the XCT500 from the default "Dual Switch" to "FNKS" and you can set the "Normal", "User 1" and "User 2" tabs to your liking.

Keep in mind if You do not need 3 separate modes for driving, you can make the "Normal" mode be a "Kill Switch" to disable the cart.
Sergio is online now   Reply With Quote
Unread 06-12-2019, 09:32 PM   #8
Gone Wild
 
Hit it like a champ's Avatar
Club Car
 
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 379
Default Re: FNKEY install on precedent

I was thinking i would like a low speed lots of torque for towing setting. so if i keep the amps up and just lower the RPMs would. I still have the towing power.
Hit it like a champ is offline   Reply With Quote
Unread 06-12-2019, 10:01 PM   #9
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 10,888
Default Re: FNKEY install on precedent

Yes you would. Your RPM's on a Sepex refers to your speed.
NoleFan4Ever is offline   Reply With Quote
Unread 06-12-2019, 10:35 PM   #10
Gone Wild
 
Hit it like a champ's Avatar
Club Car
 
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 379
Default Re: FNKEY install on precedent

Great I have been looking for examples found 1. I know Iíve seen more on this site still searching. Thanks
Hit it like a champ is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
XCT install on 07 precedent help needed Electric Club Car
09 precedent light kit install Electric Club Car
Amp and Subwoofer install CC Precedent Electric Club Car
08 Precedent light install Electric Club Car
Help with Precedent Motor install Electric Club Car


All times are GMT -5. The time now is 06:27 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.