no solenoid click,CC

OLDESTCOWBOY · 06-05-2019, 12:01 PM

I have a 96 CC converted to series with Alltrax SPM
and heavy duty solenoid to match controller. While
driving car stopped running and no click form solenoid.
Could someone tell me diagnosis procedure so I can
get cart home.

NoleFan4Ever · 06-05-2019, 12:12 PM

First thing is to check the 2 small posts on the solenoid and see if you have the 48 volts required to activate it. Place one probe on each small post and DVM set on DC volts.

Key On, in Fwd on the FNR and Go pedal depressed far enough to hear the microswitch in the throttle click.

OLDESTCOWBOY · 06-05-2019, 02:40 PM

I want to thank everybody who viewed and thought
about the problem. I hae checked all electrical and
finally "fixed" problem by tapping on the controller
with a screwdriver and cart started to move again
like nothing ever happened. I guess I will need a
new, expensive, controller. Thanks again.

Sergio · 06-05-2019, 02:53 PM

Is your Solenoid mounted on the Controller using a bracket?

OLDESTCOWBOY · 06-06-2019, 08:26 AM

No, they are mounted seperately but close together.

scottyb · 06-06-2019, 08:57 AM

Check all of your small wire connections. Make sure they are clean and tight. Everything inside that controller is potted in resin. Tapping the control with a screw driver could not effect the internals much at all.

06-05-2019, 12:01 PM	#1
OLDESTCOWBOY Not Yet Wild Join Date: Jul 2010 Posts: 38	no solenoid click,CC I have a 96 CC converted to series with Alltrax SPM and heavy duty solenoid to match controller. While driving car stopped running and no click form solenoid. Could someone tell me diagnosis procedure so I can get cart home.
OLDESTCOWBOY Not Yet Wild Join Date: Jul 2010 Posts: 38

06-05-2019, 12:12 PM	#2
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 12,209	Re: no solenoid click,CC First thing is to check the 2 small posts on the solenoid and see if you have the 48 volts required to activate it. Place one probe on each small post and DVM set on DC volts. Key On, in Fwd on the FNR and Go pedal depressed far enough to hear the microswitch in the throttle click.

06-05-2019, 02:40 PM	#3
OLDESTCOWBOY Not Yet Wild Join Date: Jul 2010 Posts: 38	Re: no solenoid click,CC I want to thank everybody who viewed and thought about the problem. I hae checked all electrical and finally "fixed" problem by tapping on the controller with a screwdriver and cart started to move again like nothing ever happened. I guess I will need a new, expensive, controller. Thanks again.
OLDESTCOWBOY Not Yet Wild Join Date: Jul 2010 Posts: 38

06-05-2019, 02:53 PM	#4
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 7,528	Re: no solenoid click,CC Is your Solenoid mounted on the Controller using a bracket?

06-06-2019, 08:26 AM	#5
OLDESTCOWBOY Not Yet Wild Join Date: Jul 2010 Posts: 38	Re: no solenoid click,CC No, they are mounted seperately but close together.
OLDESTCOWBOY Not Yet Wild Join Date: Jul 2010 Posts: 38

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-06-2019, 08:57 AM	#6
scottyb go to cartsunlimited.net Join Date: Dec 2007 Location: Southern California Posts: 68,722	Re: no solenoid click,CC Check all of your small wire connections. Make sure they are clean and tight. Everything inside that controller is potted in resin. Tapping the control with a screw driver could not effect the internals much at all.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
RXV No Solenoid Click	Electric EZGO
No click in the solenoid	Gas EZGO
96 club car ds solenoid wont click and cart wont move unless you jump solenoid	Electric Club Car
No solenoid click on 95 TXT	Gas EZGO
Solenoid won't click	Electric EZGO