lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-06-2019, 04:37 PM   #1
Sea
Not Yet Wild
 
Join Date: Oct 2012
Posts: 3
Default Precedent solenoid

I have a Precedent "forgot the year" that has no voltage to the small wires on the solenoid with pedal down. Both wires read neg-. Big lugs read 50v and controller side 49v pedal up and down. MS and MCOR work to spec. Does this solenoid activate on 48 v and which wire is suppose to be Pos+? I see they both trace back to the small wire connector on the controller.
Sea is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-06-2019, 05:39 PM   #2
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 11,910
Default Re: Precedent solenoid

You need the Key On, in Fwd, Run/Tow in Run, and Go Pedal depressed. Did you do all that?

And yes, between the 2 small post you should have 48v or pack voltage.

The light Blue supplies the 48v+ and the Blue w/White supplies the 48v- "after" all the permissiveness have been met.
NoleFan4Ever is offline   Reply With Quote
Unread 06-07-2019, 01:53 PM   #3
Sea
Not Yet Wild
 
Join Date: Oct 2012
Posts: 3
Default Re: Precedent solenoid

Thanks for the reply. This is exactly what I wanted to know. No voltage on wires and I traced them back to the controller. And yes key On, in Fwd, Run/Tow in Run, and Go Pedal depressed. I just read about the reset , I'll try that next.
Sea is offline   Reply With Quote
Unread 06-07-2019, 02:09 PM   #4
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 11,910
Default Re: Precedent solenoid

Now you need to know which one you are missing. The 48+ or 48-....
(Cart jacked up, key on, rocker switch in Fwd, and pedal depressed)
At the solenoid small posts do the following:
1- Take your DVM and place the red lead on the solid blue wire and the black lead on the main pack negative. You should get 48vdc (If not, we lost the Pos Input)
2- Next, take your DVM and place the black lead on the blue/white stripe wire and the red lead on the main pack positive. You should get 48vdc (If not, we lost the Neg input which needs all the Positives before it will pull low)
NoleFan4Ever is offline   Reply With Quote
Unread 06-18-2019, 03:19 PM   #5
Sea
Not Yet Wild
 
Join Date: Oct 2012
Posts: 3
Default Re: Precedent solenoid

I apologize for not getting back,it was unavoidable. I've used a DVM all my life and I very confuse why I couldn't get voltage in the two small solenoid wires, but in the process I checked the solenoid and the primary or activation side was open. So I replaced it and the cart is working fine. Thanks for the fast reply. This is a great cart forum.
Sea is offline   Reply With Quote
Unread 06-18-2019, 04:17 PM   #6
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 11,910
Default Re: Precedent solenoid

Sounds great. Glad you are rolling again!
NoleFan4Ever is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2009 precedent gas solenoid Gas Club Car
'06 precedent, solenoid does not close Electric Club Car
What's the best 2006 Precedent solenoid Gas Club Car
Precedent Solenoid Gas Club Car
2010 precedent solenoid Electric Club Car


All times are GMT -5. The time now is 08:45 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.