lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-09-2019, 04:46 PM   #11
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 124
Default Re: Personality switch for Alltrax

Switch

Sent from my SM-G950U using Tapatalk
scmoose is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-09-2019, 05:10 PM   #12
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 11,543
Default Re: Personality switch for Alltrax

That's the one I use. It's hidden up in the battery compartment above the eyeline.
NoleFan4Ever is offline   Reply With Quote
Unread 07-09-2019, 05:12 PM   #13
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 7,175
Default Re: Personality switch for Alltrax

If you connect two wires without using the switch and User1 and User2 become active, then you likely have a wiring problem.

Do a continuity test on the cable to make sure is not pinched somewhere and causing a short.
Sergio is online now   Reply With Quote
Unread 07-09-2019, 08:35 PM   #14
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 124
Default Re: Personality switch for Alltrax

Im not sure why both user buttons light up in the monitor tab of the toolkit program when my switch is position 1 or 2, but it seems to be responding to the parameters I have set in the tool kit. Position 0 on my switch it hauls but, position 1 or 2 is more like a normal cart, which is how I have the program set.
scmoose is offline   Reply With Quote
Unread 07-09-2019, 08:35 PM   #15
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 124
Default Re: Personality switch for Alltrax

I think one of my terminals in the plug I made up may not have been pushed in far enough into the connector.
scmoose is offline   Reply With Quote
Unread 07-10-2019, 06:36 AM   #16
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 7,175
Default Re: Personality switch for Alltrax

Quote:
Originally Posted by scmoose View Post
I think one of my terminals in the plug I made up may not have been pushed in far enough into the connector.
If it was shorting against the pin next to it, that would explain why both User1 and User2 were always powered together.
Sergio is online now   Reply With Quote
Unread 07-10-2019, 07:51 AM   #17
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 124
Default Re: Personality switch for Alltrax

No i don't think it was. As it sits, both user 1 and 2 show on at the same time in the monitor folder of the toolkit when my switch is in position 1 or 2. Hell if I know what is going on.

Sent from my SM-G950U using Tapatalk
scmoose is offline   Reply With Quote
Unread 07-10-2019, 08:12 AM   #18
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 7,175
Default Re: Personality switch for Alltrax

Quote:
Originally Posted by scmoose View Post
No i don't think it was. As it sits, both user 1 and 2 show on at the same time in the monitor folder of the toolkit when my switch is in position 1 or 2. Hell if I know what is going on.

Sent from my SM-G950U using Tapatalk
It has to be the cable, connector or the switch, since only one of the two pins has power at the time, they cannot both show ON in the monitor.
Sergio is online now   Reply With Quote
Unread 07-10-2019, 08:18 AM   #19
Getting Wild
 
Join Date: May 2018
Location: Fuquay NC
Posts: 124
Default Re: Personality switch for Alltrax

I will check the switch with a meter tonight. So If I understand correct, when my switch is in the 1 position, I should show voltage there, but zero volts on the 2nd position pin correct? Nolefan4ever how do you have your switch wired up? Do you have power going to the center pin?
scmoose is offline   Reply With Quote
Unread 07-10-2019, 08:23 AM   #20
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 7,175
Default Re: Personality switch for Alltrax

Quote:
Originally Posted by scmoose View Post
I will check the switch with a meter tonight. So If I understand correct, when my switch is in the 1 position, I should show voltage there, but zero volts on the 2nd position pin correct? Nolefan4ever how do you have your switch wired up? Do you have power going to the center pin?
Correct, power goes to the center pin.

In the center position there should be no power to either side.

When you place the switch in one of the other two positions, only the pin on the opposite side that is depressed should have power.
Sergio is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax Personality Switch - Use and Profile Suggestions Electric EZGO
Personality plug? Electric EZGO
A couple of switch questions - Run/Tow and Alltrax "Personality" Electric EZGO
Will the red ezgo personality plug help? Electric EZGO
Personality Plugs Electric EZGO


All times are GMT -5. The time now is 07:04 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.