lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-10-2019, 01:56 PM   #1
Not Yet Wild
Club Car
 
Join Date: Jul 2019
Location: Isle of Palms SC
Posts: 5
Default Club Car Precedent "open armature" fault code on my curtis hand held computer

So a couple months back I replaced brushes in a motor for a guy. Everything has been fine. Then it just stopped. Now it just does nothing. Loud click from solenoid but no movement. We've replaced solenoid, controller, speed sensor and OBC. Still nothing. Of yeah, I tried a new MCOR but nothing changed so I put the old back in. Reason we replaced brushes is because he ran out of battery and pulled it behind his truck for 1 1/2 miles in "run" mode. I bought a curtis handheld and plugged directly into the controller and it gave me the "open armature" fault code. No loose wires and speed sensor is good. Does anyone know if it's possible that when he fried his motor originally he may have also fried the terminals where the four cables connect to the motor? Could they have been partially fried at that point and then finally crapped out? I'm out of ideas.
Thanks in advance for the help.
manimal13 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-10-2019, 01:59 PM   #2
Not Yet Wild
Club Car
 
Join Date: Jul 2019
Location: Isle of Palms SC
Posts: 5
Default Re: Club Car Precedent "open armature" fault code on my curtis hand held computer

And because I know it seems weird to just throw parts at this thing, I have a garage full of parts because I have a rental fleet of all club car Precedents so I had a bunch of extras to gamble with. And like most gamblers, it has not gone my way. Haha.
manimal13 is offline   Reply With Quote
Unread 07-10-2019, 02:00 PM   #3
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 6,981
Default Re: Club Car Precedent "open armature" fault code on my curtis hand held computer

Is that the only code You are getting?

Pulling the cart while in RUN will create a tremendous amount of heat in both the Motor and the Controller Armature driver.

Most likely the Controller is bad as well.
Sergio is online now   Reply With Quote
Unread 07-10-2019, 02:07 PM   #4
Not Yet Wild
Club Car
 
Join Date: Jul 2019
Location: Isle of Palms SC
Posts: 5
Default Re: Club Car Precedent "open armature" fault code on my curtis hand held computer

So, it's a PQ06 and I switched out the controller and I'm not gonna lie, I am questioning whether the the black curtis controller I put in was the same as the black curtis controller I pulled out. It's the only fault code I got. Cart is an 06 but I did notice that the controller was manufactured in 07. Does that make a difference?
manimal13 is offline   Reply With Quote
Unread 07-10-2019, 02:19 PM   #5
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 6,981
Default Re: Club Car Precedent "open armature" fault code on my curtis hand held computer

The black Curtis 1510 is the correct Controller for that cart.

Put your meter between B+ and M-, does the voltage go from 0v to near pack voltage as You press the pedal?
Sergio is online now   Reply With Quote
Unread 07-10-2019, 02:30 PM   #6
Not Yet Wild
Club Car
 
Join Date: Jul 2019
Location: Isle of Palms SC
Posts: 5
Default Re: Club Car Precedent "open armature" fault code on my curtis hand held computer

Not sure, but I'll head that way now and see. Be back shortly. What if it does/doesn't?
manimal13 is offline   Reply With Quote
Unread 07-10-2019, 03:04 PM   #7
Not Yet Wild
Club Car
 
Join Date: Jul 2019
Location: Isle of Palms SC
Posts: 5
Default Re: Club Car Precedent "open armature" fault code on my curtis hand held computer

Quote:
Originally Posted by Sergio View Post
The black Curtis 1510 is the correct Controller for that cart.

Put your meter between B+ and M-, does the voltage go from 0v to near pack voltage as You press the pedal?
If I pressed it down about 2/3 of the way it got over 48v. If I pressed it down all the way it dropped to 31v
manimal13 is offline   Reply With Quote
Unread 07-10-2019, 04:23 PM   #8
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 6,981
Default Re: Club Car Precedent "open armature" fault code on my curtis hand held computer

It is a Motor issue then, have you tested the motor?

Disconnect the cables from the Motor A1 and A2 posts and check if You have have continuity between the Motor A1 and A2 posts.
Sergio is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Using curtis hand held with 07 precedent Electric Club Car
2011 Club Car Excel i2 locating connector for hand held Curtis programmer Electric Club Car
looking for a 48v hand held code reader Electric Club Car
Curtis hand held programmer Electric Club Car
Codes,from club car hand held computer Electric Club Car


All times are GMT -5. The time now is 07:20 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.