|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-13-2020, 01:10 PM | #1 |
Not Yet Wild
Join Date: Dec 2018
Location: Gulf Shores, AL
Posts: 18
|
Mcor wires cut and spliced on 2011 precedent
I have a 2011 precedent with DCX 500 and 502-0002 D&D motor. Real jumpy throttle at slow to medium speed... I was looking around and found these wires cut/spliced at the mcor and back by controller. Anyone have any idea what someone would be trying to accomplish when they wired this up?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-13-2020, 02:50 PM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Mcor wires cut and spliced on 2011 precedent
What's the serial number on the cart?
There should be a sticker on the right kick panel with the serial number. IF that's gone, there is another sticker on the frame crossmember below the floor. With the pedal access cover of, look back at the crossmember just above the brake cables. There were some resistors on the throttle wires built into the harness on certain Precedents that would not allow the MCOR to work with that controller. It's possible the installer just ran new wires rather than track down and remove the resistors. (assuming it had them) Another possibility is the wiring was determined to be damaged or faulty somewhere between the MCOR and controller. If you're having problem with jumpy throttle, it's probably a failed MCOR. That should be a second gen pedal assembly which you can update to the new design MCOR 4 with the conversion kit. https://www.revolutiongolfcars.com/p...conversion-kit |
02-13-2020, 03:04 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Mcor wires cut and spliced on 2011 precedent
|
02-13-2020, 04:49 PM | #4 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Mcor wires cut and spliced on 2011 precedent
Quote:
|
|
Tags |
alltrax 500, controller failure, mcor 4, precedent elect hesitates |
|
|
Similar Threads | ||||
Thread | Forum | |||
2011 DS - New MCOR 4 - Still Hesitates / Jerks | Electric Club Car | |||
mcor for precedent | Electric Club Car | |||
Mcor 2 testing 2011 club car | Electric Club Car | |||
2011 Precedent MCOR question? | Electric Club Car | |||
Extra wires near mcor | Electric Club Car |