lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-05-2009, 09:56 AM   #1
Not Yet Wild
 
ArgMatey's Avatar
E-Z-GO
 
Join Date: Feb 2009
Location: Tucson, AZ
Posts: 12
Default Adding turn signals to '07 Precedent w/lights


Have '07 Precedent with lights and horn and now adding turn signals (trying to). Got signal kit from BU and thought it would be a straightforward install...until I dropped the dash and holy moley....wires everywhere. And the installation sheet from BU left a bit to be desired. Pictures nice but... Nine pin connector here and one there. Different colored wires. I visited another thread (Precedent turn signals into '98 DS) and got some good info, but I'm still a bit confused. Okay, really confused, starting with the two 9-pin connectors (one was for the horn and it peeled off the first 9-pin which (guessing) was for the lights.

Wiring my '55 was easier than this is going to be. Anyone wanna help an old fart?
ArgMatey is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-05-2009, 11:00 AM   #2
Ban Puppy Mills & Stores!
 
scubabud's Avatar
Club Car
 
Join Date: Dec 2008
Location: SE Florida
Posts: 2,945
Default Re: Adding turn signals to '07 Precedent w/lights

Quote:
Originally Posted by ArgMatey View Post
Have '07 Precedent with lights and horn and now adding turn signals (trying to). Got signal kit from BU and thought it would be a straightforward install...until I dropped the dash and holy moley....wires everywhere. And the installation sheet from BU left a bit to be desired. Pictures nice but... Nine pin connector here and one there. Different colored wires. I visited another thread (Precedent turn signals into '98 DS) and got some good info, but I'm still a bit confused. Okay, really confused, starting with the two 9-pin connectors (one was for the horn and it peeled off the first 9-pin which (guessing) was for the lights.

Wiring my '55 was easier than this is going to be. Anyone wanna help an old fart?
Were your lights and horn from a factory add on or aftermarket?
scubabud is offline   Reply With Quote
Unread 05-05-2009, 11:16 AM   #3
Not your usual outlaw
 
essness's Avatar
Yamaha
 
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 19,854
Default Re: Adding turn signals to '07 Precedent w/lights

Did you get a diagram that looks like the attached?
Attached Images
File Type: jpg p-128-Wiring_Instructions.jpg (37.6 KB, 191 views)
essness is offline   Reply With Quote
Unread 05-05-2009, 01:57 PM   #4
Not Yet Wild
 
ArgMatey's Avatar
E-Z-GO
 
Join Date: Feb 2009
Location: Tucson, AZ
Posts: 12
Default Re: Adding turn signals to '07 Precedent w/lights

The wiring diagram I got was not like you picture though I do have one like it. the unit came from BU with flasher and all that and they state it should plug right in....so, I plugged the connector into the one the horn used to be connected to and things working (turns and lights anyway) as they should. I don't have brake lights though and still have some loose wires....

from the Precedent to the signal harness:

green -> yellow
black -> white
brown/white -> red/white with inline fuse (this one is still 'loose')
red -> green
white -> orange
blue/white -> red (another 'loose' one right now)
yellow -> brown
orange -> nothing on harness but I think that's where the horn wire goes


I did connect the flasher to the light switch 'in' and the turns are working as well as the little light in the signal unit. Just don't know where to plug those other wires in to....

Oh, and there's a 'loose' red wire from the signal unit that I wonder about. I tried connecting to the fused r/w and the brake lights stayed on so that's not right. Need to find the brake switch wires I'm thinking...
ArgMatey is offline   Reply With Quote
Unread 05-05-2009, 02:12 PM   #5
Not Yet Wild
 
ArgMatey's Avatar
E-Z-GO
 
Join Date: Feb 2009
Location: Tucson, AZ
Posts: 12
Default Re: Adding turn signals to '07 Precedent w/lights

This is the wiring diagram that came with the turn signal kit.
My '07 Precedent has 4/12's for batteries.
Attached Images
File Type: jpg PrecedentTurns.jpg (43.2 KB, 166 views)
ArgMatey is offline   Reply With Quote
Unread 05-05-2009, 02:27 PM   #6
just hangin' around
 
oxfordlawn's Avatar
Club Car
 
Join Date: Jan 2009
Location: Oxford Flo-Rida
Posts: 1,102
Default Re: Adding turn signals to '07 Precedent w/lights

Quote:
Originally Posted by essness View Post
Did you get a diagram that looks like the attached?

I hate it when I have to turn my monitor upside down to look at a picture
oxfordlawn is offline   Reply With Quote
Unread 05-05-2009, 02:31 PM   #7
just hangin' around
 
oxfordlawn's Avatar
Club Car
 
Join Date: Jan 2009
Location: Oxford Flo-Rida
Posts: 1,102
Default Re: Adding turn signals to '07 Precedent w/lights

So did you ever have brake lights....thats a whole seperate kit also.

The head and taillight basic light kit did not have brake lights.
oxfordlawn is offline   Reply With Quote
Unread 05-05-2009, 02:34 PM   #8
Not your usual outlaw
 
essness's Avatar
Yamaha
 
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 19,854
Default Re: Adding turn signals to '07 Precedent w/lights

Quote:
Originally Posted by oxfordlawn View Post
I hate it when I have to turn my monitor upside down to look at a picture
I didnt even realize it was upside down

ArgMatey,
I would call BU. I am not familiar with a "plug and play" signal kit.

Sorry
essness is offline   Reply With Quote
Unread 05-05-2009, 11:37 PM   #9
Not Yet Wild
 
ArgMatey's Avatar
E-Z-GO
 
Join Date: Feb 2009
Location: Tucson, AZ
Posts: 12
Default Re: Adding turn signals to '07 Precedent w/lights

yep, had brake lights before.....

were you standing on your head looking at the picture or what? ...oh, you mean ESSNESS' pic...

still looking where those red wires go....to the frame and brake switches according to the diagram. Guess I'll be splicing wires once I figure out which ones.
ArgMatey is offline   Reply With Quote
Unread 05-06-2009, 03:34 AM   #10
just hangin' around
 
oxfordlawn's Avatar
Club Car
 
Join Date: Jan 2009
Location: Oxford Flo-Rida
Posts: 1,102
Default Re: Adding turn signals to '07 Precedent w/lights

Take a close up picture of the 9 pinn connector off your turn switch assembly....don't cut anything yet, also take some pictures of behind the dash wiring and post them here. If I can see the wire colors of your connector, I may be able to help. Look at thios thread also and see if this helps you at all
Wiring precedent turn signal into 1998 DS harness (gettin' horn)
oxfordlawn is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Adding brake lights to an E-Z-Go Design Center
Turn signals...again Electric EZGO
ezgo turn signals update Electric EZGO
turn signals Gas Yamaha
Turn Signals Electric Club Car


All times are GMT -5. The time now is 01:04 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.