WHEELIES, Yes, WHEELIES!

scubabud · 05-17-2009, 12:59 PM

Quote:

Originally Posted by Extractor

setback. Got the USB cable but just realized I need a silly power adapter to power the controller while I program it I guess...! Didn't plan on that. #@&$!
Anything else I need? The website http://www.buggiesgonewild.com/elect...alltraxinc.com said I need a USB driver too. Got the program off the website but do I need to locate the driver for the controller also? Who has programmed their controller?? I'm ready to do wheelies!

If an AXE, (I believe yours is Series,) then they show in their PDF file connecting a 15-20 VDC to the B- connector for the Negative and to Pin1 for the positive. If it's a DCX, (Shunt like mind,) then you would might need one of their connectors since the positive lead is connected to 4 different Pins but it could be done if you are careful. Just use 2 of your batteries in series as shown in the picture. The first picture is for AXE, (Series) and the second is for DCX, (Shunt).

Your PC should already have USB drivers installed.

Extractor · 05-17-2009, 01:23 PM

ok, here it goes (yup, series so much easier) ...

dirtysouth · 05-17-2009, 02:21 PM

Quote:

Originally Posted by Extractor

not in jail... not yet. working on it. page 8 will have wheelie pics... that should buy me some more time!

I might have the disc brakes done before you post pics of a wheelie...

scubabud · 05-17-2009, 02:30 PM

Quote:

Originally Posted by dirtysouth

I might have the disc brakes done before you post pics of a wheelie...

How about disc brakes for your normal 6" lift kits? Um... Jake's has them for theirs... I just don't want to get Jaked Off about this ya know...

dirtysouth · 05-17-2009, 02:36 PM

Quote:

Originally Posted by scubabud

How about disc brakes for your normal 6" lift kits? Um... Jake's has them for theirs... I just don't want to get Jaked Off about this ya know...

Can't do it for the reg. 6" or the Super Sport. Sorry. The spindles and a-arms aren't designed to handle the stresses of front brakes. We are making disc brakes for racing use, but they will swap out to a LT.

Extractor · 05-17-2009, 02:45 PM

Quote:

Originally Posted by dirtysouth

I might have the disc brakes done before you post pics of a wheelie...

Almost there.................

(good to hear you're still working on the disc brakes)

scubabud · 05-17-2009, 02:49 PM

Quote:

Originally Posted by dirtysouth

Can't do it for the reg. 6" or the Super Sport. Sorry. The spindles and a-arms aren't designed to handle the stresses of front brakes. We are making disc brakes for racing use, but they will swap out to a LT.

Thanks for the information... I hope you know I was only joking with ya... "Jaked Off", as in Jakes... LOL

dirtysouth · 05-17-2009, 02:51 PM

Quote:

Originally Posted by scubabud

Thanks for the information... I hope you know I was only joking with ya... "Jaked Off", as in Jakes... LOL

It's all good...

redriderno22 · 05-17-2009, 08:04 PM

nothin yet???

dirtysouth · 05-17-2009, 08:06 PM

Quote:

Originally Posted by redriderno22

nothin yet???

Well, we are gettin purty close ta page 8...

05-17-2009, 01:23 PM	#42
Extractor Gone Wild Join Date: Nov 2008 Location: Florida Posts: 442	Re: WHEELIES, Yes, WHEELIES! ok, here it goes (yup, series so much easier) ...

05-17-2009, 08:04 PM	#49
redriderno22 Gone Wild Join Date: Apr 2009 Location: Marengo OHIO Posts: 610	Re: WHEELIES, Yes, WHEELIES! nothin yet???

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Wanna see a EZGO do wheelies???	Electric EZGO
Monster EZGO Does Wheelies >>>	Extreme DC!
should this be doing wheelies?	Lifted Golf Carts
Dangerous wheelies	Videos
Wheelies	Big Block Talk!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum