lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-15-2009, 10:52 AM   #1
Getting Wild
 
pjshane's Avatar
Club Car
 
Join Date: Jun 2009
Location: Hilton Head, SC
Posts: 104
Default Programming Alltex Controller

Later today or maybe tomorrow, I will have a new Alltrax 500 amp controller installed and ready for programming.

I find instructions for using a PC and RS232 serial cable to make the connection to the controller. However, I find no such connection on the controller. Anybody know where that is? Is it maybe under the plastic disk on top of the controller?

tnx/pjs
pjshane is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-15-2009, 11:25 AM   #2
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Programming Alltex Controller

Well, it depends on the controller too. If you got an AXE then the RS232 port is under the black plug. It's about 1 1/2 inches in diameter.

If you got an NPX, its non-programable.
roady89 is offline   Reply With Quote
Unread 06-15-2009, 11:38 AM   #3
Gone Wild
 
blaynef13's Avatar
Club Car
 
Join Date: Mar 2009
Location: Big Sandy, TX
Posts: 308
Default Re: Programming Alltex Controller

I have a DCX500, and yes it is under the black disc.

BAF
blaynef13 is offline   Reply With Quote
Unread 06-15-2009, 01:23 PM   #4
Getting Wild
 
pjshane's Avatar
Club Car
 
Join Date: Jun 2009
Location: Hilton Head, SC
Posts: 104
Default Re: Programming Alltex Controller

Unfortunately, the new controller will not fit under the stock controller's protective cover which means it could get wet. I do notice that there are some plastic fastener openings on top of the new controller that might be meant to secure some kind of cover.

Anyone know or have any ideas?
pjshane is offline   Reply With Quote
Unread 06-16-2009, 09:53 AM   #5
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: Programming Alltex Controller

Give AllTrax Tech Support a call !
http://www.alltraxinc.com/contactus.html
GLEEMO is offline   Reply With Quote
Unread 06-16-2009, 10:11 AM   #6
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: Programming Alltex Controller

If you refer to 2 plastic screw recepticles they are for the solenoid
Can I buy the old environmental cover if you can not use it? I have a cart which needs one. Thank you
scottyb is offline   Reply With Quote
Unread 06-16-2009, 10:39 AM   #7
Getting Wild
 
pjshane's Avatar
Club Car
 
Join Date: Jun 2009
Location: Hilton Head, SC
Posts: 104
Default Re: Programming Alltex Controller

Ah, ha! What we can learn on this forum. I've already attached my new solenoid to the area where the stock unit was located.

I may use the plastic receptacle holes to attach a home made cover if Alltrax does not make them.

Re old environmental cover, send me a note on this forum. tnx/pjs
pjshane is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Programming Curtis Controller Electric golf carts
Precedent Speed code programming?? Electric Club Car
axe 4844 / initial programming? Electric EZGO
a DC motor controller ( electronic speed controller) Golf Carts and Parts
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 Electric EZGO


All times are GMT -5. The time now is 02:37 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.