Club Car go problem

Bill1055 · 07-01-2009, 07:32 PM

I have a 1999 Club car, 48 volt. It will not move when acillerator is pressed. I suspect problem may be with solinoid. Does anyone know what voltage should be applied across the small terminals. I have a reading of about 4 volts.

rusty · 07-01-2009, 08:15 PM

Hello Bill1055 and Welcome to the forum.

gulffer1 · 07-01-2009, 08:16 PM

Welcome!

oxfordlawn · 07-01-2009, 10:57 PM

48V with key on and in a gear and gas pedal pressed.

Bill1055 · 07-02-2009, 01:33 PM

Yes, batteries have a full charge, Key is on, Unit is in gear, pedal is depressed.
Nothing happens.

oxfordlawn · 07-02-2009, 08:50 PM

Quote:

Originally Posted by Bill1055

Yes, batteries have a full charge, Key is on, Unit is in gear, pedal is depressed.
Nothing happens.

WHAT?!?!?! you asked how many volts. I said 48V and you are saying the batteries are full ---- huh?!?!

Bill1055 · 07-03-2009, 09:47 PM

I probably did not quote it right. What I needed was how many volts are needed to activate the solinoid.

scottyb · 07-03-2009, 10:15 PM

If it is a 48v solenoid it might activate at 36v but not sure ..... 48v is what it is made for, so put 48 to it

Bill1055 · 07-04-2009, 09:10 AM

Thank You for your help.

07-01-2009, 07:32 PM	#1
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7	Club Car go problem I have a 1999 Club car, 48 volt. It will not move when acillerator is pressed. I suspect problem may be with solinoid. Does anyone know what voltage should be applied across the small terminals. I have a reading of about 4 volts.
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7

07-01-2009, 08:15 PM	#2
rusty Golf Cart Photographer Join Date: Jan 2007 Location: Wichita Falls Texas - My Rides 1996 E-Z-GO and 2002 Club Car IQ Posts: 6,133	Re: Club Car go problem Hello Bill1055 and Welcome to the forum.

07-01-2009, 08:16 PM	#3
gulffer1 Gone Wild Join Date: May 2009 Posts: 490	Re: Club Car go problem Welcome!
gulffer1 Gone Wild Join Date: May 2009 Posts: 490

07-01-2009, 10:57 PM	#4
oxfordlawn just hangin' around Join Date: Jan 2009 Location: Oxford Flo-Rida Posts: 1,086	Re: Club Car go problem 48V with key on and in a gear and gas pedal pressed.

07-02-2009, 01:33 PM	#5
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7	Re: Club Car go problem Yes, batteries have a full charge, Key is on, Unit is in gear, pedal is depressed. Nothing happens.
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-03-2009, 09:47 PM	#7
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7	Re: Club Car go problem I probably did not quote it right. What I needed was how many volts are needed to activate the solinoid.
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7

07-03-2009, 10:15 PM	#8
scottyb golf cart enthusiast Join Date: Dec 2007 Location: So Cal Posts: 21,876	Re: Club Car go problem If it is a 48v solenoid it might activate at 36v but not sure ..... 48v is what it is made for, so put 48 to it

07-04-2009, 09:10 AM	#9
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7	Re: Club Car go problem Thank You for your help.
Bill1055 Not Yet Wild Join Date: Jul 2009 Posts: 7

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Club Car problem	Electric Club Car
I'm new here and have a Club Car problem.	Electric Club Car
98 Club Car problem	Electric Club Car
97 club car problem	Electric Club Car