|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-27-2009, 10:21 PM | #1 |
Not Yet Wild
Join Date: Jul 2009
Posts: 15
|
elect 96 cc want move solenoid problem?
I was giving a 48v electric 96cc that was bought in 96 and the man passed away in 97. Cart sat in a building until 7/20/09. Batteries bad(6-8v's). Just to get it running, to checked out i put 4/12v in series.I had to jump the solenoid to make it run. I had to this with the old batteries with the charger on.Looking on this site early i read that the solenoid is bad,i bought one from the cc dealer. The one i removed was round #1018070-01 and the new one is sq;#sw8o-1275p 48v made by Allwright. these have difference connectors. I installed it like they told me and i have the same problem.Want run unless you short across the large termenals.Would this be the wrong part are do i need to look for something else. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2009, 10:24 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: elect 96 cc want move solenoid problem?
Look to a faulty activation circuit. Have you downloaded the wiring diagram for the cart from the stickies?
|
07-27-2009, 10:45 PM | #3 |
Not Yet Wild
Join Date: Jul 2009
Posts: 15
|
Re: elect 96 cc want move solenoid problem?
Thanks, I do not know where the activation circuit is,but i will look at the diagram. thanks again.
|
07-28-2009, 12:10 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: elect 96 cc want move solenoid problem?
The solenoid is a big switch like a lightswitch. It turns power on and off at the big terminals when activated by a pos and a neg charge at the small terminals
|
07-28-2009, 09:24 AM | #5 |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: elect 96 cc want move solenoid problem?
So run down the smal wires on the solinoid. whatever they go to (micro switch) is probably defective !
|
07-28-2009, 12:53 PM | #6 |
Not Yet Wild
Join Date: Jul 2009
Posts: 15
|
Re: elect 96 cc want move solenoid problem?
thanks for the infomation so for.I will trace the small wires from the solenoid to see where this mico switch is and do whats necessary to correct it. I ran across something else before i got a chance to read the last helpful artical. With the new soleniod on, i can short across the small termanel that is hot when the accellartor is depressed to the large termenal that goes back to the controller and it will run like normal.Any sugestions, Thanks for your help. PS if i go from the other small termenal to the same large termenal it will chadder. Again thanks for the help.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car wont move, dead solenoid? | Electric Club Car | |||
solenoid problem | Electric Club Car | |||
solenoid clicks/ wont move | Electric EZGO | |||
cart won't move,solenoid terminal was melted. | Electric Club Car | |||
half to cross solenoid over and hold peddle to make move..whats wrong? | Electric EZGO |