Please HELP!!! Need wiring diagram for V-Glide to Solid State conversion

impalass88

I am going to be doing a conversion on a 1991 club Car from 36 volt to 48 volt. I will be using a Curtis PB-6 0-5K pot box, All Trax AXE 4855 500 amp programable controller, HD Solenoid, HD F&R Switch, and 2 gauge welding cable. I am looking for a diagram on exactly how to wire this. I have seen a few and I am not excatly sure which to use. I would like to know location of fuses and any microswitches that need to be used. I am new to this so any help you can give me is much appreciated.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

I saw one posted today....... Click on todays posts In the blue ban in the header or search around the electric CC section..... how far have you gotten? Your first task is to mount and make the pb-6 work!

Xact1

impalass88,

You might want to read the thread that I started..... it is very similar to your conversion.

http://www.buggiesgonewild.com/elect...d-upgrade.html

Xact1

Also,

You really don't need 2 gauge welding cable. It is harder to work with and may pose a problem finding suitable lug ends. I used 4 gauge welding cable and it worked great, no heat at all.