|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-07-2009, 12:20 PM | #1 |
Gone Wild
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 263
|
Precedent seat belts
Thought I would pass along some pics of the seat belt install on our Precedent.
The front mounts are made from 1X2 tubing laid on the long side. The rear mount is 1X3 flat. All the angle brackets are 2" angle cut 2 inches wide and welded at "about" a 45 degree angle. I had to be careful that the front belts were easy to get ahold of, but didn't stick out too far & interfere with raising the seat. Dave |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
4 retractable seat belts | Golf Carts and Parts | |||
Seat belts | Electric Club Car | |||
Seat Belts for 90 Marathon | Gas EZGO | |||
Seat Belts | Design Center | |||
Lap Seat Belts | Golf Carts and Parts |