Problem on 95 cc, need help please.

pghtex · 10-05-2009, 02:31 PM

I put my controller on last week and changed my cables to 4 ga. Ever since then after I charge it it gives me grief. After I unplug it, it doesnt want to move. It just bucks a little and then doesnt do anything. I have no loose connection, i have checked each one three times after my last episode. After it sits for awhile unplugged from the charger it will run normal. WIERD!

Thanks guys

pghtex · 10-05-2009, 09:35 PM

Anybody?

Charlie5 · 10-06-2009, 12:39 AM

Was the old controller bad or did you upgrade? If you upgraded the controller, I would put the old one back on and see if the problem goes away. Also, does the bucking happen any other time than after charging the batteries?

buscopat · 10-06-2009, 05:05 AM

After charging, check the pack voltage.
It could be an overvoltage issue, if you have the wrong controller.

pghtex · 10-06-2009, 07:36 AM

I got the controller from a reputable place and its correct for the cart and correctly programmed. It only happens right after charging. I am going to check the pack voltage later today and see if buscopat is right. Never thought that it could over charge.

GLEEMO · 10-06-2009, 07:58 AM

Quote:

Originally Posted by buscopat

After charging, check the pack voltage.
It could be an overvoltage issue, if you have the wrong controller.

Controller could be on the marginal side for overvoltage detection.
Try another controller, check pack Voltage 30 minutes after charging.

A pack for 48 Volt cart can run up to almost 60 Volts during charge, after charge completed it settles to surround 53.

willie · 10-06-2009, 07:58 AM

What kind of controller is it? I agree with buscopat it sounds like it's an over voltage problem.

pghtex · 10-06-2009, 08:21 AM

Its an alltrax 4844, thanks guys. really hate to switch that controller back though. Can it be programmed to fix this?

willie · 10-06-2009, 08:32 AM

It depends on the model. The axe series can be programmed. The npx cannot. Check the alltrax website. If it is programmable you can get the cord to hook it to a laptop from radio shack for around $35. the software on the alltrax site is very user friendly, and the site has alot of useful info.

GLEEMO · 10-06-2009, 08:33 AM

Call alltrax good bunch of guys

Technical Support & Ordering
Information
Phone: 541-476-3565

Fax: 541-476-3566

Email: helpdesk@alltraxinc.com

Sale Inquiries, Product
Information:
Same phone# plus email at:
info@alltraxinc.com

Return Material Authorization
(RMA) Process
rma-info@alltraxinc.com

Dealer - Distributor Locater
product-locator@alltraxinc.com

10-05-2009, 02:31 PM	#1
pghtex Not Yet Wild Join Date: Sep 2009 Location: Southwest PA Posts: 45	Problem on 95 cc, need help please. I put my controller on last week and changed my cables to 4 ga. Ever since then after I charge it it gives me grief. After I unplug it, it doesnt want to move. It just bucks a little and then doesnt do anything. I have no loose connection, i have checked each one three times after my last episode. After it sits for awhile unplugged from the charger it will run normal. WIERD! Thanks guys

10-05-2009, 09:35 PM	#2
pghtex Not Yet Wild Join Date: Sep 2009 Location: Southwest PA Posts: 45	Re: Problem on 95 cc, need help please. Anybody?

10-06-2009, 12:39 AM	#3
Charlie5 Not Yet Wild Join Date: Aug 2009 Posts: 8	Re: Problem on 95 cc, need help please. Was the old controller bad or did you upgrade? If you upgraded the controller, I would put the old one back on and see if the problem goes away. Also, does the bucking happen any other time than after charging the batteries?
Charlie5 Not Yet Wild Join Date: Aug 2009 Posts: 8

10-06-2009, 05:05 AM	#4
buscopat Gone Crazy Join Date: Dec 2008 Location: Churubusco, IN Posts: 2,161	Re: Problem on 95 cc, need help please. After charging, check the pack voltage. It could be an overvoltage issue, if you have the wrong controller.

10-06-2009, 07:36 AM	#5
pghtex Not Yet Wild Join Date: Sep 2009 Location: Southwest PA Posts: 45	Re: Problem on 95 cc, need help please. I got the controller from a reputable place and its correct for the cart and correctly programmed. It only happens right after charging. I am going to check the pack voltage later today and see if buscopat is right. Never thought that it could over charge.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-06-2009, 07:58 AM	#7
willie Getting Wild Join Date: Oct 2008 Location: North Carolina Posts: 99	Re: Problem on 95 cc, need help please. What kind of controller is it? I agree with buscopat it sounds like it's an over voltage problem.

10-06-2009, 08:21 AM	#8
pghtex Not Yet Wild Join Date: Sep 2009 Location: Southwest PA Posts: 45	Re: Problem on 95 cc, need help please. Its an alltrax 4844, thanks guys. really hate to switch that controller back though. Can it be programmed to fix this?

10-06-2009, 08:32 AM	#9
willie Getting Wild Join Date: Oct 2008 Location: North Carolina Posts: 99	Re: Problem on 95 cc, need help please. It depends on the model. The axe series can be programmed. The npx cannot. Check the alltrax website. If it is programmable you can get the cord to hook it to a laptop from radio shack for around $35. the software on the alltrax site is very user friendly, and the site has alot of useful info.

10-06-2009, 08:33 AM	#10
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: Problem on 95 cc, need help please. Call alltrax good bunch of guys Technical Support & Ordering Information Phone: 541-476-3565 Fax: 541-476-3566 Email: helpdesk@alltraxinc.com Sale Inquiries, Product Information: Same phone# plus email at: info@alltraxinc.com Return Material Authorization (RMA) Process rma-info@alltraxinc.com Dealer - Distributor Locater product-locator@alltraxinc.com