lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-10-2009, 07:22 PM   #1
Gone Wild
 
Join Date: Feb 2008
Location: Central Georgia
Posts: 247
Default Gene Davis

Hello. I have a problem with a 2006 Club Car Precedent cart. I cleaned the batteries with soda and water. When I went to move it, it would not go. Had a smell of burnt bakelite or maybe plastic odor. Moved the tow/run switch to tow and dsconnected the 48 V. positive battery cable because I had to leave. When I came back the next morning and started to reconnect the cable it arced like an electric welder starting a weld. Needless to say I did not attempt that again. Does this mean the controller or maybe the OBC has shorted out. Cart has been running Ok till this happened.I would appreciate any advice as this is my first time with this.

Gene Davis Tennille, Ga.
gadavis is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-10-2009, 10:31 PM   #2
Gone Wild
 
Join Date: Oct 2007
Location: Sebring,Florida
Posts: 156
Default Re: Gene Davis

When you put it in tow/run you should dicconnect main - and then main +.Then reinstall by attaching + first then - and then tow/run back to run.You can bypass computer to see if cart will run.But I am sure you blew the controller with hat much arking.
Tom
ltmoeller is offline   Reply With Quote
Unread 10-11-2009, 04:19 PM   #3
Gone Wild
 
Join Date: Feb 2008
Location: Central Georgia
Posts: 247
Default Re: Gene Davis

Thanks, how do you bypass the cotroller? Gene
gadavis is offline   Reply With Quote
Unread 10-11-2009, 05:34 PM   #4
Gone Wild
 
Join Date: Oct 2007
Location: Sebring,Florida
Posts: 156
Default Re: Gene Davis

Attach a jumper wire where the yellow wire is on the solenoid to the negative side of the left rear battery.You can also disconnect the black wire from the computer that is on the fuse at the charger receptcial on the cart.attach a jumper wire from there to negative side of left rear batery.
Tom
ltmoeller is offline   Reply With Quote
Unread 10-12-2009, 12:46 PM   #5
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: Gene Davis

Quote:
Originally Posted by ltmoeller View Post
Attach a jumper wire where the yellow wire is on the solenoid to the negative side of the left rear battery.You can also disconnect the black wire from the computer that is on the fuse at the charger receptcial on the cart.attach a jumper wire from there to negative side of left rear batery.
Tom
This is VERY interesting , so this is bypassing the Controller or is it only bypassing the OBC ?
GLEEMO is offline   Reply With Quote
Unread 10-12-2009, 03:19 PM   #6
Gone Wild
 
Join Date: Feb 2008
Location: Central Georgia
Posts: 247
Default Re: Gene Davis

Thanks tom, I will try that tomorrow. Gene
gadavis is offline   Reply With Quote
Unread 10-12-2009, 06:11 PM   #7
Gone Wild
 
Join Date: Oct 2007
Location: Sebring,Florida
Posts: 156
Default Re: Gene Davis

I meant to say bypass computer.
Tom
ltmoeller is offline   Reply With Quote
Unread 10-13-2009, 10:59 AM   #8
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: Gene Davis

again for myself please clarify , many people who have solid state controllers
refer to these as Computers, and the On Board Computer also as a Computer.

So I'm assuming you are referring to the OBC !
This thread could be used in the future to help others, I just want to make sure
everything is clear (I'm not busting U'r Balls)
GLEEMO is offline   Reply With Quote
Unread 10-13-2009, 06:27 PM   #9
Gone Wild
 
Join Date: Oct 2007
Location: Sebring,Florida
Posts: 156
Default Re: Gene Davis

gmorrison,I am explaining bypassing the obc.I realize he was asking how to bypass the controller and my answer was bypassing computer better known as the obc.You do not bypass a computer.If you are testing my knowlege so be it.
As far as working on a 95-96-97 regan with two solenoids I know of several CC dealers who refuse to work on them.I am looking for someone who has got them working.What I am doing now is converting it to a series cart as I have most all the parts used to do it and it will be solved.
Tom
ltmoeller is offline   Reply With Quote
Unread 10-13-2009, 06:36 PM   #10
Gone Wild
 
Join Date: Oct 2007
Location: Sebring,Florida
Posts: 156
Default Re: Gene Davis

After reading my last post.You can bypass the obc(computer)you cannot bypass the controller.This is a correction to my last post.
Tom
ltmoeller is offline   Reply With Quote
Reply

Tags
06 precedent problem
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes



All times are GMT -5. The time now is 04:56 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.