|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-21-2009, 08:29 AM | #1 |
Not Yet Wild
Join Date: Oct 2009
Posts: 5
|
Axle identification? - Club Car Electric
First post! Hello all...
I'm reviving a Club Car that was totaled in a wreck and almost everything has been fixed, except the bent flange on the passenger side rear axle. Not sure I can get it back to square, so a replacement axle is my only viable option. I tried to find a junk-part replacement but it looks like the axle I have is circa 1985 ish, but I'm not sure, as there are no markings on the cart to positively Id this thing. I have removed the axle - The differential has 'Made in Japan' on it, but no reference (at least that I can find) - I assume it's a Kawasaki... I called the junk-parts people and they say they cannot find a replacement - The only thing I have to go on is the measurements / config. The axle measures, from the inside flange to the end of the axle, at 20 7/8 inches - The flange is 'squared' with rounded edges, 4 lugged, and has a C clip access hole in it. In order, I have the flange, a c-clip (over an axle-shaft bearing spring), the bearing, a bushing and then the actual shaft with a 13 splined end. What do I have? Is there a manual-page referencing this axle with the part #? Any help is greatly appreciated and I can post a picture later on... thanks Rich |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-21-2009, 08:48 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Axle identification? - Club Car Electric
Hello, I have your parts! Kawasaki made it. I had a 1985 CC with a broken diff housing so I saved the axle housings complete... I have the entire passenger side in good order. Housing, bearing, seal,& axle.
|
10-21-2009, 08:51 AM | #3 |
Gone Crazy
Join Date: Jun 2008
Location: Mississippi
Posts: 2,183
|
Re: Axle identification? - Club Car Electric
To BGW
|
10-21-2009, 09:05 AM | #4 |
Not Yet Wild
Join Date: Oct 2009
Posts: 5
|
Re: Axle identification? - Club Car Electric
cool - how do I contact you?
rich |
10-21-2009, 09:08 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Axle identification? - Club Car Electric
Post your email for a few minutes here....And I will contact you.
|
10-21-2009, 09:11 AM | #6 |
Not Yet Wild
Join Date: Oct 2009
Posts: 5
|
Re: Axle identification? - Club Car Electric
aok
|
10-21-2009, 09:19 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Axle identification? - Club Car Electric
Email sent ..... requesting a pic of your axle. 2 different rearends were used by graziano and kawasaki.... I have both styles. Delete your email here if you got mine so you don't get spammed
|
10-21-2009, 09:25 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Axle identification? - Club Car Electric
Is this the axle we you are looking for?
|
10-21-2009, 09:32 AM | #9 |
Not Yet Wild
Join Date: Oct 2009
Posts: 5
|
Re: Axle identification? - Club Car Electric
...at first glance, that looks like the puppy. The key parameters, as posted before, are 13 splines and 20 7/8" from the inside flange to the end of the splined side. I'll post / send you a pic. later today...Many thanks!
|
10-21-2009, 09:38 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Axle identification? - Club Car Electric
The axle is the rusty thing. The puppy is pictured below Okay lemme know
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Rear Axle Electric EZ-GO | Electric EZGO | |||
converting ezgo axle from electric to gas use | Gas EZGO | |||
Club Car Identification | Gas Club Car | |||
84 Gas Club Car part identification | Gas Club Car | |||
EZ Go Electric Cart Identification | Electric EZGO |