lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-31-2009, 01:13 PM   #1
Not Yet Wild
 
Join Date: Oct 2009
Posts: 9
Default 2001 Club Car "Regen" GE Controller Upgrade

Hi All
I think I fried my controller on my 2001 Regen Club Car. It's a GE Controller p/n IC 3645SH4D222C2, 48V 220amp. The (1) ring Terminal (green wire I think) that goes from the right side of my controller to the motor looks like it blew up and burnt at the controller. I'm hoping that it didn't damage the motor. I don't know what happened, the solenoid clicks, but no go. I'm thinking it may have stayed full open sending a ton of current to the controller burning it up!

For fixing sake, I'm going to change the solenoid, and maybe upgrade my controller, and that's it. Before I do that I'd like any advice on how high in amperage you can go on a new controller from 220amps to something before you hurt your motor? I don't want a bad combination that costs me a motor in the future. I'd like maybe 400amps, but is this too much for the stock motor? Can you guys give me a range? I know I'll need to upgrade cable probably..

Any adivce will help!
jearley35purdue is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-31-2009, 06:00 PM   #2
Gone Wild
 
cheapjeep2's Avatar
Club Car
 
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,529
Default Re: 2001 Club Car "Regen" GE Controller Upgrade

Hey Welcome to the forum, I have a 2001 "REGEN" as you do, I've upgarded the motor and a quite a bit. Here is an application guide from AllTrax and lots of additional information that will help you. Most put in 400 amp. I have upgraded welding cables through out and putting in DCX400PDPLUS.

Here are some shots of mine and some of the upgrades.
http://good-times.webshots.com/slide...69126026rWriOE

http://www.alltraxinc.com/files/Doc1...tion-Guide.pdf

http://www.alltraxinc.com/files/Doc1...ns-Learned.pdf

http://www.alltraxinc.com/files/DOC1...S-WIRE-DIA.pdf

http://www.alltraxinc.com/files/Doc1...tall-Guide.pdf
cheapjeep2 is offline   Reply With Quote
Unread 11-01-2009, 11:07 AM   #3
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: 2001 Club Car "Regen" GE Controller Upgrade

Yep or just call the guys and tell them what U have now and where U want to go from here and they will advise http://www.alltraxinc.com/

AllTrax Technical Support & Ordering Information
Phone: 541-476-3565

Fax: 541-476-3566
GLEEMO is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
club car regen speed controller upgrade Electric Club Car
04 precedent "jumping" after alltrax upgrade Electric Club Car
2001 CC Regen Motor Upgrade Suggestions Electric Club Car
"HEAVY DUTY" GE Speed controller Golf Carts and Parts
"93" Club Car"...Rough /Hop/Hop Ride Electric Club Car


All times are GMT -5. The time now is 12:07 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.