|11-14-2009, 02:58 PM||#1|
Not Yet Wild
Join Date: Nov 2009
The dog ate my cheat sheet. Can't find my notes on replacing wires to my 1996 48 volt club car. Had the motor refurbed now ready for re-install and don't want to cross wires. Schematics I looked at on site did not help so far.
4 bolts on motor labeled S1 A1 S2 A2. Wires coming from F/R switch are orange, blue and the bottom is white. D/C motor controller has green going to motor.
Appreciate any help.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|11-14-2009, 04:27 PM||#2|
Join Date: Jun 2007
Re: rewiring motor
Green to A1 (controller B+ to motor A1)
White to A2 (lower left of F/R to A2 on motor)
Orange to S1 (right side of movable cam to S1 on motor)
Blue to S2 (there are 2 blues I believe, one goes to controller M- from right side of F/R. The othe blue goes from left side of movable cam to S2 on motor)
|1978 Harley Motor swap to a CRF 450cc motor. pics inside.. gearing help???/||Gas Harley Davidson|
|I have what seems a rare motor, anyone know of a compatible motor||Electric golf carts|
|Motor controller and Motor match?||Electric Club Car|
|Rewiring starter||Gas EZGO|
|Rewiring carts- 48 volt||Electric EZGO|