|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-03-2010, 12:09 PM | #1 |
Getting Wild
Join Date: Jan 2010
Location: Central MS
Posts: 98
|
02 CC Rebuild Options
Hi Guys - Brand new to carts - Just purchased a bare bones 02 CC Regen IQ Cart, 48V. I will be looking to upgrade the cart for hunting. I am considering the following and want to be sure I am not overlooking anything. I have lurked on this site for a few days and researched on some of the sponsor supplier sites. Any opinions on my choices below are much appreciated;
D&D Hi Torque Motor with Alltrax DCX 600 Controller - Is there another controller/motor I should consider? - Upgraded wires, HD Solenoid, and F/R Switch ***Edit - I already have #2 welding cable connecting all the batt's together - What other wires need upgrading? Either a Jake's 6" A-Arm lift or AllSports Super Sport 6" lift - Is one better than the other? 23" tires/10" Wheels - Looking for something lightweight - ITP/Carlisle?? Other? Light Kit, Voltage Converter. I have been searching the sponsors trying to find the best prices - If there are any other sites out there that are competitive I would like to search those as well? I know this is pretty broad, but any opinions or reasons for doing something different are certainly welcome. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-04-2010, 03:41 PM | #2 |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: 02 CC Rebuild Options
All cable which came from the Factory as #6 should be upgraded to at least #4 or #2's
|
01-04-2010, 05:08 PM | #3 |
Getting Wild
Join Date: Jan 2010
Location: Central MS
Posts: 98
|
Re: 02 CC Rebuild Options
Thanks for the Reply G - Here are some more details - Spoke with D&D today and have a more detailed plan - D&D 502:2 Hi torque motor with an Alltrax 500DCX controller. He agreed with others on here that going beyond 500 amps with a 48 volt motor wouldn't give you much of an advantage due to battery limitations. I'll be replacing all cables as you indicated except the #2's that are currently on the batt terminals. I'm getting the kit from D&D along with the HD Solenoid. He said no F/R switch was needed with the Regen IQ cart.
Going with the Allsports SuperSport 6" or 7.5" lift. Swamp Fox tires with 10" wheels |
01-05-2010, 06:07 PM | #4 |
Getting Wild
Join Date: Jan 2010
Location: Central MS
Posts: 98
|
Re: 02 CC Rebuild Options
As I go through this rebuild, is it better to just remove the body in order to install the lift, motor, etc? Or work with the body on from underneath? I will eventually replace the body anyway, so if this is the time to do it, I may as well go that route now. I know the controller and some other parts will be connected to the body... Any lessons learned here?
Brian |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZ GO ST 2+2 Lift Options? | Gas EZGO | |||
Options for flooded G1 | Electric Yamaha | |||
Tire options?? | Design Center | |||
Cart Options | Extreme DC! | |||
G2 Muffler Options | Gas Yamaha |