01-05-2010, 06:12 PM | #1 |
Getting Wild
Join Date: Jan 2010
Location: Central MS
Posts: 98
|
How to Test OBC
Can someone explain to me how to test the OBC on my 02 CC Regen IQ or point me somewhere online that will walk me through it? I am about to go though a rebuild and if it's bad i would like to change it now. I have seen on some other threads on checking it if charger won't shut off vs. a battery being bad, etc. However, I know my batteries are bad so I am not sure if I can go that route. Any help here is greatly appreciated.
Brian |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-06-2010, 09:58 AM | #2 | |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: How to Test OBC
Quote:
|
|
01-06-2010, 10:10 AM | #3 |
Getting Wild
Join Date: Jan 2010
Location: Central MS
Posts: 98
|
Re: How to Test OBC
I have read that, but it didn't seem to tell me if it was good or not. I have read a lot of threads on charging problems and it seems they all eliminate other things (batteries, chargers, etc) then just say it has to be the OBC since the other things are good. I was looking for a way to test the OBC using output voltage, currents, etc to see if it was operating as it should.
Since I posted the original post, my charger finally shut off though at about 8 amps, even with the bad batteries. I tested the charger and I think it is good (the timer anyway) - so with all that I am assuming my OBC is OK. I hate to assume, but it appears from the lack of responses and information I have not been able to find that there is no way to actually perform a test on the OBC to see if it is indeed working as it should. Yes/No/Maybe? |
01-06-2010, 10:20 AM | #4 |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: How to Test OBC
Yeah the best way to test the OBC is with known good batteries and a known good charger .
Once you have these it will be obvious if its bad. And they are one of the easiest things on the cart to change out as long as you label the ends and get the correct replacement. If U had a hand held CDM from CC (Big $$) you could use it to read the OBC for errors , history ...etc |