Club Car charger fried

FloridaCracker · 04-23-2010, 07:20 PM

Can anyone tell me if a newer EZ Go Precedent 36 volt charger can be wired for a 91 Club Car ? or if not will the transformer from the EZ Go work in the Club Car charger.

Thanks in advance.

TahoeDawgZ71 · 04-23-2010, 08:21 PM

Quote:

Originally Posted by FloridaCracker

Can anyone tell me if a newer EZ Go Precedent 36 volt charger can be wired for a 91 Club Car ? or if not will the transformer from the EZ Go work in the Club Car charger.

Thanks in advance.

You lost me with the E-Z-GO Precedent part.... Club Car makes the Precedent. If you're trying to use an EZGO 36V charger on a 36V Club Car that will be fine, just change the DC cord to match your car... Never mix voltages... ie, a 48V Charger on a 36V car or vice versa.

FloridaCracker · 04-23-2010, 08:41 PM

Yes David my bad,

The EZ Go has a three wire plug and my ClubCar has a two wire plug, the third wire goes from plug to the control board and the club car doesn't use a third wire.

Where would I connect the third wire to.?

golfcarfixer · 04-23-2010, 08:46 PM

Just dont use the extra wie its got to be black and white.It will still work.

FloridaCracker · 04-23-2010, 09:15 PM

Thanks golfcartfixer, without the third wire connected it does nothing

The d@mn capacitor is good though, d@mn that hurts.

FIXEROFCARTS · 04-24-2010, 09:34 AM

Connect the small red wire to the Negative lead which is the transformer wires. It will work then.

04-23-2010, 07:20 PM	#1
FloridaCracker Not Yet Wild Join Date: Apr 2010 Posts: 3	Club Car charger fried Can anyone tell me if a newer EZ Go Precedent 36 volt charger can be wired for a 91 Club Car ? or if not will the transformer from the EZ Go work in the Club Car charger. Thanks in advance.
FloridaCracker Not Yet Wild Join Date: Apr 2010 Posts: 3

04-23-2010, 08:41 PM	#3
FloridaCracker Not Yet Wild Join Date: Apr 2010 Posts: 3	Re: Club Car charger fried Yes David my bad, The EZ Go has a three wire plug and my ClubCar has a two wire plug, the third wire goes from plug to the control board and the club car doesn't use a third wire. Where would I connect the third wire to.?
FloridaCracker Not Yet Wild Join Date: Apr 2010 Posts: 3

04-23-2010, 08:46 PM	#4
golfcarfixer Gone Wild Join Date: Sep 2009 Location: Forest City N.C. Posts: 2,660	Re: Club Car charger fried Just dont use the extra wie its got to be black and white.It will still work.

04-23-2010, 09:15 PM	#5
FloridaCracker Not Yet Wild Join Date: Apr 2010 Posts: 3	Re: Club Car charger fried Thanks golfcartfixer, without the third wire connected it does nothing The d@mn capacitor is good though, d@mn that hurts.
FloridaCracker Not Yet Wild Join Date: Apr 2010 Posts: 3

04-24-2010, 09:34 AM	#6
FIXEROFCARTS Gone Wild Join Date: Feb 2009 Location: Not sure yet Posts: 500	Re: Club Car charger fried Connect the small red wire to the Negative lead which is the transformer wires. It will work then.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Fried Component on Curtis Logic Board -- Help ID?	Extreme DC!
Fried CB- Do I need a power convertor?	Electric EZGO
Motor or Controller Fried	Electric Club Car
solenoid fried?	Electric EZGO
Fried Motor?	Electric Club Car