lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-19-2008, 09:03 AM   #1
72 volts!
 
Andy4639's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 5,412
Default Club Car lift installed

OK
I started last night about 5:30 and I had both front spindles done and was ready to go out to eat at 7:00 and I took a shower too! No pictures of that!!!!!!!


1990 Club Car lift install!

Now what I do have pictures of is the lift install on the passenger side which is the same for the driver's side except the driver's side only has one tie rod fitting to take loose.
First think about safety all the time when working with anything you have to jack up off the ground. I placed two jack stands under the frame and used the floor jack only to raise the cart up.

This is for the passenger side which is just like the Driver side.

#1. First take the lugs loose before you jack the cart up.
#2. After you get the wheel off this is what you see. The two tie rods and spindle and hub with shock mounts.



I like to take the dust cap off next and disassamble the hub from the spindale. Take cotter key out back nut off and slide the hub off.
Then disconnect the tie rods. Sorry I got to taking it apart and forgot about a picture of it.



I had to use my pickle fork on the driver's side but the two on the passenger side came right off. Huh..
Now your ready to take the spindale off.



See the nut in this next picture. Take it loose. Don't worry about the other end it's made to the spindale it want turn. Pull the bracket up and slide the spindale off.




Now your ready to reassemble it all.
Just put everything back as you took it off.
Here is the new spindale mounted.




I always re-grease everything as I go too. Use new cotter key's also.
The tie rods in the new spindale assembly.

Andy4639 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-19-2008, 09:18 AM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,053
Default Re: Club Car lift installed

Nicely done. Who's kit is that?
scottyb is offline   Reply With Quote
Unread 01-19-2008, 11:15 AM   #3
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Club Car lift installed

Quote:
Originally Posted by scottyb View Post
Nicely done. Who's kit is that?
Not sure. IMO doesn't look very safe though. Just think what would happen if that bolt holding the spindle on snapped.
roady89 is offline   Reply With Quote
Unread 01-19-2008, 12:11 PM   #4
72 volts!
 
Andy4639's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 5,412
Default Re: Club Car lift installed

Plum Quick is correct. As far as safety goes. It's as good as anything out there in my opinion. Now with that being said I wouldn't punish it like some people do like jumping it.
90% of all lifted carts very seldom see any hard off roading. I think it's fine. It's going to be a street cruiser anyway!
Andy4639 is offline   Reply With Quote
Unread 01-19-2008, 01:19 PM   #5
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,053
Default Re: Club Car lift installed

That's true.
Product choice definitly depends on the intended use.
Thanks for the pics. Keep us posted. I 've got one just like it waiting...for some decisions.
scottyb is offline   Reply With Quote
Unread 01-19-2008, 06:39 PM   #6
72 volts!
 
Andy4639's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 5,412
Default Re: Club Car lift installed

Here it is with the back end finished. Sitting on 13" VW wheels & Tires.

Andy4639 is offline   Reply With Quote
Unread 01-19-2008, 07:37 PM   #7
Gone Wild
 
groundpounder's Avatar
Yamaha
 
Join Date: Sep 2007
Location: maine
Posts: 3,341
Default Re: Club Car lift installed

looks cool nice job
groundpounder is offline   Reply With Quote
Unread 01-20-2008, 08:23 PM   #8
Dum Spiro Spero
 
carolinasled's Avatar
 
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 718
Default Re: Club Car lift installed

KMC Stealths FTW. I had a set back in 99 on a lowered silverado. What year truck is that 71 72?

The cart also looks good, Did the wheels bolt right up? 4 on 4 bolt pattern right? I think hondas or 4 x 100? I may be wrong.
carolinasled is offline   Reply With Quote
Unread 01-20-2008, 08:34 PM   #9
72 volts!
 
Andy4639's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 5,412
Default Re: Club Car lift installed

1971 Chevy truck.
VW wheels are 4 on 4 and bolt right up.
Honda,vega,mazda and other's all will work on these carts.
Andy4639 is offline   Reply With Quote
Unread 01-20-2008, 08:36 PM   #10
Dum Spiro Spero
 
carolinasled's Avatar
 
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 718
Default Re: Club Car lift installed

Thanks for verifying that.
carolinasled is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
new exhaust and intake installed on 24hp honda Gas EZGO
01 club car ds lynx jake's lift kit Electric Club Car
got my lift installed Lifted Golf Carts
Club Car Lift systems Electric Club Car
G9 Lift Kit Installed Lifted Golf Carts


All times are GMT -5. The time now is 05:22 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.