|04-25-2010, 03:09 PM||#1|
Not Yet Wild
Join Date: Apr 2010
Which wires to Upgrade to 2 Gauge
I have upgraded most of my wiring.
2 gauge - from motor to controller and from controller to solenoid.
1 gauge - from solenoid to battery bank, between all batteries, and to controller.
The other wires I haven't upgraded from the stock 6 gauge are the three wires(white, orange, and blue) that go from the motor to the forward/reverse switch. Do these also need to be upgraded?
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|04-25-2010, 04:24 PM||#3|
Happy All Hallow's Eve
Join Date: Dec 2007
Location: Southern California
Re: Which wires to Upgrade to 2 Gauge
I dunno how you are gonna do that in 2 ga .... the hole in the F&R S1 and S2 connections are quite small, like 1/4 inch .... dang 2ga is over kill in my opinion.... 4 might be easier to work with ..... I know they make the ends for a 4g with a 1/4 hole..
|1/0 wires||Electric EZGO|
|WHat cables need changed? 4 gauge upgrade||Electric EZGO|
|New 4 Gauge Wires||Electric EZGO|
|2 gauge wires..||Electric EZGO|
|what is the diameter of 2 gauge and 4 gauge battery wire?||Electric EZGO|