lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-25-2010, 09:25 PM   #1
Getting Wild
 
Join Date: May 2010
Posts: 109
Default Help with Lighting options 03 DS IQ

I need to start from scratch and add lights. Primarily Headlamps and Tails.

I probably need to go with a voltage reduces from 48V to 12 so thats probably a given to get that?

http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT

I see some options for Precedents that us a light bar that seems like it would be applicable to the DS? Seem easier than trying to cut out the body to install recessed Bezels. Why would not a Precedent light bar work well for a DS?

http://cgi.ebay.com/ebaymotors/CLUB-...ltDomainQ5f100

This years DS does not have the molded in places for lamps like I have seen on others so I am sort of resistance to just buying any sort of DS specific thing.

I have seen these units on ebay that seem to be for those sorts of DS models that never had lamps but they still look like they may be difficult to get the area cut out to mount them into. See these links for the ones I am considering.

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

Comments and recommendations welcome.

Here is a picture of the body I would be installing them into. Note that there is no molded area delineating the cut out areas

cphilip is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-26-2010, 11:36 AM   #2
Not Yet Wild
Club Car
 
Join Date: Jan 2010
Location: Charleston, SC
Posts: 66
Default Re: Help with Lighting options 03 DS IQ

My cart came with the lights mounted in the body...which required cut-outs on the front and back. The kits have a template and, IMHO, provide a much cleaner appearance than the bolt-on type. A jig saw or one of those rotozip-type tools will cut a clean enough hole in which to mount the lights.

Currently I am running mine off of the two middle batteries until I purchase a voltage reducer. I've only blown the front lights once...when I turned them on while the batteries were charging.
Loosewire is offline   Reply With Quote
Unread 05-26-2010, 06:43 PM   #3
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,989
Default Re: Help with Lighting options 03 DS IQ

DS cars do not come with premolded light cutouts or anything of the sort. Every cowl you see has been cut with a rotary tool, either by the factory, a dealer, or an individual. Your cowl and body are no different. Get a dremel or a rotozip and follow the instructions and use the templates that come with the kit. It's extremely easy and it looks so much better than any bolt-on light kit available.
TahoeDawgZ71 is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Club Car DS Gas Lighting Gas Club Car
Lighting up an '07 Precedent Electric Club Car
LED lighting question Electric Club Car


All times are GMT -5. The time now is 08:58 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.