lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-26-2010, 02:01 PM   #1
Not Yet Wild
 
Join Date: May 2010
Posts: 2
Default Ez go wiring problems.

I have a 90' s model ez go elec cart. It has only one solenoid with a forward and reverse switch. I am trying to get this thing running again for the kids but am have no luck. Cart was running when it just stopped and has not ran since. Burnt the end of a wire off that connects to the motor. Fixed that. Still won't go. Requested wiring diagram from dealer and from what I gather from diagram my buggy is wired differently. Not sure how to post pics but will try. Any help would be greatly appreciated
Clee337 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-26-2010, 02:02 PM   #2
Not Yet Wild
 
Join Date: May 2010
Posts: 2
Default Re: Ez go wiring problems.

Cart also has resistor coils
Clee337 is offline   Reply With Quote
Unread 05-26-2010, 02:06 PM   #3
Gone Wild
 
A.D.'s Avatar
 
Join Date: Sep 2008
Posts: 192
Default Re: Ez go wiring problems.

You might get better help in the EZ-GO section.
A.D. is offline   Reply With Quote
Unread 05-27-2010, 09:47 AM   #4
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: Ez go wiring problems.

check the micro,s behind the F&R lever..........theres a double back there on drivers side with a metel lever type thingy and that seems to bend out of place causing cart to stop and if you havn,t try jumping your solenoid large post see if that does anything.......................................... ...
shadowman is offline   Reply With Quote
Unread 06-13-2010, 11:32 PM   #5
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: Ez go wiring problems.

always possible controller is bad but there are many things to test and check before jumping right to the controller.......can,t tell you how many people stopped at my place and said my cart stopped and i replaced the controller and still no go??just had a guy last week said my cart won,t go should i get motor or controller or both....................turned out to be a bad solenoid................thats why i preach the manual its gives you a step by step that takes 99.9%of the guesswork out of it..............................
shadowman is offline   Reply With Quote
Unread 06-14-2010, 06:41 AM   #6
??????
 
LostHusker's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: South TX
Posts: 8,569
Default Re: Ez go wiring problems.

Clee

Here is a link to a wiring diagram, check it out, if this does not work, then go to the Home tab, then click ezgo electic, there is will find more information regarding your cart. Good Luck


EZGO Resistor cart wiring
LostHusker is offline   Reply With Quote
Unread 06-14-2010, 07:12 AM   #7
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: Ez go wiring problems.

you,ll never find a sulution according to just a diagram my point was with a service manual it takes you by the hand and walks you thur the right way to do it instead of guessing at it....................and yes from behind a puter everything we print is armchaair quarterbacking..............there are a lot of varibles......like whos working on the cart ( their skill level ) i mean right now i could be repling to a 12 year old and wouldn,t know it........know what i mean........................................
shadowman is offline   Reply With Quote
Unread 06-14-2010, 09:43 AM   #8
Gone Wild
E-Z-GO
 
Join Date: Mar 2010
Location: Mountaindale, Oregon
Posts: 303
Default Re: Ez go wiring problems.

Quote:
Originally Posted by Clee337 View Post
I have a 90' s model ez go elec cart. It has only one solenoid with a forward and reverse switch. I am trying to get this thing running again for the kids but am have no luck. Cart was running when it just stopped and has not ran since. Burnt the end of a wire off that connects to the motor. Fixed that. Still won't go. Requested wiring diagram from dealer and from what I gather from diagram my buggy is wired differently. Not sure how to post pics but will try. Any help would be greatly appreciated
There is a spring loaded contact pin that makes contact with the individual studs on the speed board. Check that this pin moves freely in its sleeve.
e-z-go1988 is offline   Reply With Quote
Reply

Tags
ez go, wiring
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Motor Wiring burning problems Electric Club Car
1984 EZ Go wiring problems Electric EZGO
wiring problems Members Rides
EZ-GO 1984 Wiring problems Electric golf carts
wiring problems Electric EZGO


All times are GMT -5. The time now is 12:15 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.