|06-03-2010, 08:03 AM||#1|
Not Yet Wild
Join Date: Jan 2010
Location: Charleston, SC
Steering "bump-stop" fix
What, if anything, are you using to stop the steering from going too far one way on carts with Jake's spindle lifts? My front right tire rubs the body before the bump-stop on my Jake's spindle hits the cart frame. If I had a 3/4" to 1" block in there, it would prevent the tire from rubbing and would also balance the steering rotations from center to left and center to right.
Alignment is adjusted and the toe in is less than 1/4".
Last edited by Loosewire; 06-03-2010 at 08:04 AM.. Reason: spelling
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|"slow" Precedent "need Speed"||Gas Club Car|
|Wheels and Tires in So Cal 22" paddles on Douglas, 25" Dunlop on ITP, 27" ITP's||Golf Carts and Parts|
|"93" Club Car"...Rough /Hop/Hop Ride||Electric Club Car|
|89" Marathon with 4" lift....can I fit 23" tires???||Electric EZGO|