lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-14-2010, 12:02 AM   #21
Not Yet Wild
 
dukgetr's Avatar
Club Car
 
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
Default Re: 97 cc 36v vglide conversion

10-4 on the solenoid wires
dukgetr is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-14-2010, 12:05 AM   #22
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,053
Default Re: 97 cc 36v vglide conversion

The blues look like they connect to the microswitch.... open her up and see? The black and white should be the throttle position indicator wire to the controller? But I am confused about the 1 to 2 wire split on the white? can you open it up and tell us what color wires go to the micro switch inside?
scottyb is offline   Reply With Quote
Unread 07-14-2010, 12:10 AM   #23
Not Yet Wild
 
dukgetr's Avatar
Club Car
 
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
Default Re: 97 cc 36v vglide conversion

Blue and green go to micro switch and the black and white both have splits in them with round plug connectors (female ends) the blue wire from micro has a male rpc, the green has a female spade connector. The black wire also has what looks like a diode??? or something wired inline.
dukgetr is offline   Reply With Quote
Unread 07-14-2010, 12:16 AM   #24
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,053
Default Re: 97 cc 36v vglide conversion

Lets see a pic of the diode in the black wire?

Wire color diagrams are for sissies
Color wires lead to discussions about colors instead of function ..........
Without color you have to know what wire goes from where to where and why
scottyb is offline   Reply With Quote
Unread 07-14-2010, 12:17 AM   #25
Not Yet Wild
 
dukgetr's Avatar
Club Car
 
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
Default Re: 97 cc 36v vglide conversion

Here is a better picture of those two wires.
Attached Images
File Type: jpg vglide wires.jpg (127.4 KB, 18 views)
dukgetr is offline   Reply With Quote
Unread 07-14-2010, 12:17 AM   #26
Gone Wild
 
rabbitreborn's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Central Florida
Posts: 2,704
Default Re: 97 cc 36v vglide conversion

Scotty, the Black and white are split because that car was originally a 48 volt unit that used the 3rd micro on the F&R for the "half speed reverse". One of them (I think the black) will have diodes/resistors in line on it to reduce the resistance to half the "normal" resistance.

dukgetr, unless you WANT half speed reverse, clip the white and black to the point where you only have a single strand of wire and then extend them back to your controller.
rabbitreborn is offline   Reply With Quote
Unread 07-14-2010, 12:22 AM   #27
Not Yet Wild
 
dukgetr's Avatar
Club Car
 
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
Default Re: 97 cc 36v vglide conversion

So clip the diode/resistor end off the black and remove either leg on the white?
dukgetr is offline   Reply With Quote
Unread 07-14-2010, 12:24 AM   #28
Not Yet Wild
 
dukgetr's Avatar
Club Car
 
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
Default Re: 97 cc 36v vglide conversion

10-4 got your meaning now. Definetely don't need half speed reverse.
dukgetr is offline   Reply With Quote
Unread 07-14-2010, 12:27 AM   #29
Gone Wild
 
rabbitreborn's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Central Florida
Posts: 2,704
Default Re: 97 cc 36v vglide conversion

Quote:
Originally Posted by dukgetr View Post
So clip the diode/resistor end off the black and remove either leg on the white?
exactly... I guess "clip until you have a single strand" was a bad choice of wording, but at least you got my meaning.....

As a trained E-Z-GO mechanic, I still remember the first time I saw that resistor/diode through the micro for half speed reverse setup... I was scratching my head for quite a while thinking how odd that was..... It has since grown on me, but I still prefer E-Z-GO's setup.......
rabbitreborn is offline   Reply With Quote
Unread 07-14-2010, 12:31 AM   #30
Not Yet Wild
 
dukgetr's Avatar
Club Car
 
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
Default Re: 97 cc 36v vglide conversion

Thanks for all the help guys. Hopefully will have time to tinker tomorrow evening and post progress.
dukgetr is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
vglide grinding Electric Club Car
What is this on my solenoid 97 cc VGlide Electric Club Car
Question converting VGlide&coils to Vglide&controller Electric Club Car
SPEED UPDATE; 97 CC VGlide 36/48 conversion Electric Club Car
Vglide to controller, is this right? Electric Club Car


All times are GMT -5. The time now is 09:29 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.