|07-07-2010, 06:46 PM||#1|
Not Yet Wild
Join Date: Jun 2010
Location: Union Hall, VA
No power after replacing solenoid
I have a 96 DS club car, 36volt and for the 2nd time have replaced the solenoid but still have no power (batteries are fully charged). There is no click from the solenoid either.
Initially I wired the first one up incorrect so assumed I fried the solenoid and/or diod do this time I replace both and am certain it is wired correctly. When I jump the soleniod it moves but otherwise nothing.
When I wired the first one wrong could I have effected the ignition? The limit switch? Also, this cart has a "snubber" that connects onto the small posts of the solenoid. Could that be bad? New to cart ownership so just picking this up.
Any suggestions would be appreciated.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|no power to controller side of solenoid||Electric EZGO|
|Solenoid does not clickand no power to controller||Electric EZGO|
|no power to controller side of solenoid||Electric Club Car|
|240-ohm resistor across main power solenoid?||Electric Club Car|
|G9? Replacing stock air box with K&N?||Gas Yamaha|