lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-12-2010, 03:09 PM   #1
Gone Wild
 
davet's Avatar
Club Car
 
Join Date: Sep 2009
Location: DOVER,DE
Posts: 530
Default pb6 into 2001 regen

Anyone ever put a PB6 throttle in a 2001 CC regen?? My question is 3 wires out of the multi step pot box,2 wires out of the pb6 any help on how to wire this.thanx Dave
davet is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-12-2010, 04:02 PM   #2
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: pb6 into 2001 regen

If you have correct PB-6 unit ( RATHER THAN PB-5 WITH NO MICRO ) it will have a ( micro switch with 3 leads ) Com-NO-NC "PLUS" the 3 wire leads ( In Loom ) connected to potentiometer.
OLD MEC is offline   Reply With Quote
Unread 07-12-2010, 05:14 PM   #3
Gone Wild
 
davet's Avatar
Club Car
 
Join Date: Sep 2009
Location: DOVER,DE
Posts: 530
Default Re: pb6 into 2001 regen

[QUOTE=OLD MEC;426839]If you have correct PB-6 unit ( RATHER THAN PB-5 WITH NO MICRO ) it will have a ( micro switch with 3 leads ) Com-NO-NC "PLUS" the 3 wire leads ( In Loom ) connected to potentiometer.[/QUOTE
Hey MEC,how are you??Got the pb6 from East Coast just now getting time to dive in.The micro wiring is no problem,the multi step pot box has 3 leads in a plug to the controller,purple,yellow wblk stripe,white with blk stripe.PB6 is a 2 wire black and one white.test procedure for the pot box is purple and yellow 0-5k,so I'm thinking they would be the 2 the blk and wht from the pb6 should connect to.???Dave
davet is offline   Reply With Quote
Unread 07-12-2010, 05:31 PM   #4
Gone Wild
 
davet's Avatar
Club Car
 
Join Date: Sep 2009
Location: DOVER,DE
Posts: 530
Default Re: pb6 into 2001 regen

Read a little more,purple is constant 5v signal to potentiometer,yellow w blk voltage input 3.5 volts pedal up to 0v,and white w blk completes negitive voltage circut through pot. Dave
davet is offline   Reply With Quote
Unread 07-12-2010, 05:41 PM   #5
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: pb6 into 2001 regen

Having never wired a Regen stock controller to PB-6 SO Im only guessing but feel that you are correct as output should be across Black ( moveable contact ) and White lead. Looked at Curtis PB-6 diagram which shows Green NOT BEING USED on following Curtis controllers. Models 1209B, 1221B, 1231C.
OLD MEC is offline   Reply With Quote
Unread 07-12-2010, 05:59 PM   #6
Gone Wild
 
davet's Avatar
Club Car
 
Join Date: Sep 2009
Location: DOVER,DE
Posts: 530
Default Re: pb6 into 2001 regen

Well I hope someone has done it,I hate to shoot in the dark like this,I'm thinking make up a test harness and put the batts back in to test before I go thru all the crap to mount it .and then find out it isn't going to work.Dave
davet is offline   Reply With Quote
Unread 07-12-2010, 07:52 PM   #7
??????
 
LostHusker's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: South TX
Posts: 8,569
Default Re: pb6 into 2001 regen

Can't you call who sold it to you for some support?
LostHusker is offline   Reply With Quote
Unread 07-12-2010, 07:57 PM   #8
Gone Wild
 
rabbitreborn's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Central Florida
Posts: 2,704
Default Re: pb6 into 2001 regen

Correct me if I am wrong, but didn't the 2001 regens use a 5k-0 input? The PB-6 unit you bought will be reading 0-5k (unless you bought a modified unit specifically for this cart).
rabbitreborn is offline   Reply With Quote
Unread 07-12-2010, 08:42 PM   #9
Gone Wild
 
davet's Avatar
Club Car
 
Join Date: Sep 2009
Location: DOVER,DE
Posts: 530
Default Re: pb6 into 2001 regen

Rabbit,I call it a 2001 cause usually everyone tells me I don't have what I have,it's a 2000 DCS 48V regen,factory it had a 0-5k muti step pot box,this cart I rebuilt after a saltwater swim and after everyone told me not too.The reason for this change is a choppy throttle at low speed.Dave
davet is offline   Reply With Quote
Unread 07-13-2010, 09:33 AM   #10
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: pb6 into 2001 regen

I thought about this last night and came to the same conclusion that RABBITREBORN came to, that originally the cart should have come with 5K-0 ohms pot and controller?
To confirm your white black leads set your meter to ohms and you should see 0-5K ohms on PB-6 from at rest ( 0 ) to wide open on lever ( 5K ). Then you must confirm what controller you have so it will match the PB-6.
OLD MEC is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2001 Club Car "Regen" Quick Question Electric Club Car
97 regen cart...I HATE REGEN BRAKING!! Electric Club Car
2001 Club Car "Regen" GE Controller Upgrade Electric Club Car
2001 CC Regen Cart Electric Club Car
2001 CC Regen Motor Upgrade Suggestions Electric Club Car


All times are GMT -5. The time now is 05:03 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.