lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-14-2010, 10:11 AM   #11
Moderator
 
rib33024's Avatar
E-Z-GO
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 13,159
Default Re: need advice on obc

I need some typing classes-

Slow
rib33024 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-14-2010, 10:11 AM   #12
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,077
Default Re: need advice on obc

YES I mean two 6g cables. The obc comes with one thru it and add one more 6g going around it. Two 6 gauge cables is more copper than one 4g ..... Either way you need two cables and you need to have a 3/8 amp fuse at the receptacle. You need the warning light. This obc is an upgrade = next generation from the POS you had which they do not make any more so put the whole thing in except the long silver thing IF you already have a fuse link at the receptacle........ I hope this helps clear up what I said before.....
scottyb is offline   Reply With Quote
Unread 08-14-2010, 10:21 AM   #13
Gone Wild
Club Car
 
Join Date: Feb 2009
Location: mississippi
Posts: 213
Default Re: need advice on obc

yes that clears it up... i guess i will just have to see once i make it to dash where the warning light goes and where the wires go..... and yes it does have a 3/8 fuse in behind charger port thanks i just thought it would be tight quarters with all them wires on that controller B tab is what had me a loop but i guess they will fit
toogood4ubalius79 is offline   Reply With Quote
Unread 08-14-2010, 10:27 AM   #14
Gone Wild
Club Car
 
Join Date: Feb 2009
Location: mississippi
Posts: 213
Default Re: need advice on obc

how can i get the number 4 gauge out of the hole in old obc safely without cutting the cable end and have to re crimp it
toogood4ubalius79 is offline   Reply With Quote
Unread 08-14-2010, 12:02 PM   #15
Gone Wild
Club Car
 
Join Date: Feb 2009
Location: mississippi
Posts: 213
Default Re: need advice on obc

i cut the end off and headed to parts house to get new end what way is the best way or right way.. about the obc, leave the new 6 gauge in obc and run old 4 gauge around to controller or cut the new 6 and put old 4 in new obc
toogood4ubalius79 is offline   Reply With Quote
Unread 08-14-2010, 01:26 PM   #16
Gone Wild
Club Car
 
Join Date: Feb 2009
Location: mississippi
Posts: 213
Default Re: need advice on obc

I am at a stand still i dont have a orange and white wire coming off my key switch so where do i hook the orange/white wire? Do i cut the spade end off of brown wire and put a loop connector and put it on key switch where the brown is or do i just hook the two browns together need help thanks
toogood4ubalius79 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Any advice Electric EZGO
need advice Gas Club Car
Need advice... Electric Club Car
Advice on G22 Gas Yamaha
Advice Gas EZGO


All times are GMT -5. The time now is 01:35 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.