|08-20-2010, 10:03 AM||#1|
Join Date: Jun 2010
Precedent light kit - not working
I have the front light bar installed and connections made but the light won't come on. I went back and checked the connection to the light itself and sure enough one of the pins got pushed out when I connected it the first time. Fixed and still no light. So, I'm going to go back behind the dash and check the connector there as well but I'm hoping somebody will respond and help me on another question while I'm doing that.
I'm assuming I don't have a 48v to 12v converter since this is a stock golf course retiree. So, I'm following the insructions that have me make a connection to the blue wire on the 4th battery and then to another blue wire on the passenger side under the plastic cover in the middle of the battery bay. The only 12 gauge blue wire with a female spade connector I could find was already plugged into a male connector coming off one of the electronic boxes in there. I made the assumption that that is the wire I needed and plugged into that one. Is that correct or am I looking for a wire that isn't there?
edit - NEVERMIND: wrong blue wire - the right one was hiding from me. Let there be light!
Last edited by SaltLifeCC; 08-20-2010 at 10:32 AM.. Reason: Problem solved
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|08-21-2010, 09:58 PM||#2|
Dawg Gone Wild
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Re: Precedent light kit - not working
Glad you found it... Sometimes it can be tucked in there behind the solenoid.
|Precedent Brake Light Shorting Out||Electric Club Car|
|precedent light kit||Electric Club Car|
|2007 Precedent Light Kit||Electric Club Car|
|new light kit not working||Electric EZGO|
|Precedent Street Legal Light Kit||Gas Club Car|