|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-26-2010, 05:38 AM | #1 |
Not Yet Wild
Join Date: Aug 2010
Posts: 1
|
lifting DS wheel question
building a 4'' lift kit for a 93 DS got some 22x11x8 duro knobbys on the way planning to mount them on the factory wheels will i need spacers?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-26-2010, 07:11 AM | #2 |
Gone Wild
Join Date: Jan 2010
Location: Houston, Texas
Posts: 179
|
Re: lifting DS wheel question
I have not tried it before because I was always told "you can not use stock wheels with a lift", so you probably need spacers.
|
08-26-2010, 07:50 AM | #3 |
Gone Wild
Join Date: Jan 2009
Location: south carolina
Posts: 160
|
Re: lifting DS wheel question
You might want to check with site-sponsors and just go ahead and put off-set rims on these tires that way there shouldn't be any rubbing issues. The regular steel wheels are not that expensive unless you already have mags and don't want to change, hope this may help. Good Luck!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Wheel question | Gas Yamaha | |||
wheel question | Lifted Golf Carts | |||
Wheel Question | Electric Club Car | |||
G16 wheel question | Gas Yamaha | |||
Wheel Question ??? | Gas EZGO |