lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-10-2010, 09:42 PM   #1
Not Yet Wild
 
Join Date: Sep 2010
Posts: 2
Default did I fry the controller

I"m a newby as you will see...
2006 club cart - while repairing the A2 cable on motor accidently touched the F2 connector causing sparks. After cable repair done, tried cart and power seems good but when pressed pedal smoke came from under shroud. Disconnected batter opened shroud discovered the "pre-resistor" was hot and melted. Someone told me the solenoid was fried, so changed the solenoid and pre-resistor only to have the same thing happen again, pre-resistor gets hot, disconnected the battery again. Could it be that I fried the controller on the first attempt? Curtis 1510A-5250???
steland is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-10-2010, 10:52 PM   #2
Gone Wild
 
golfcarfixer's Avatar
Club Car
 
Join Date: Sep 2009
Location: DELAWARE
Posts: 2,656
Default Re: did I fry the controller

If its an IQ car you probably did as the controllers are real sensitive,What were you thinking by not unhooking the battery cables?
golfcarfixer is offline   Reply With Quote
Unread 09-11-2010, 12:52 AM   #3
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: did I fry the controller

I think it is an IQ cart cause he said "F2" terminal......I think series should say "S"
roady89 is offline   Reply With Quote
Unread 09-11-2010, 07:28 AM   #4
Not Yet Wild
 
Join Date: Sep 2010
Posts: 2
Default Re: did I fry the controller

You are correct I was not thinking, all I tried to do was repair a cable that seemed otherwise a simple fix to my original problem - no power to motor.
The does motor has a decal identifying as F2 where one of the cable attaches to it and next to it was the A2 , the one that broke off due to corrosion.

Thanks for info.

Bob
steland is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Get new Controller Now or Later??? Electric EZGO
Ez Go Controller Electric EZGO
a DC motor controller ( electronic speed controller) Golf Carts and Parts
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 Electric EZGO
Is it the controller for sure ? Electric EZGO


All times are GMT -5. The time now is 09:29 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.