lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-28-2010, 08:19 PM   #11
Not Yet Wild
 
Join Date: Mar 2009
Posts: 45
Default Re: solenoid not clicking

i installed a new rogers 586 solenoid and cart now moves great in reverse but does not work in forward the noid will click and noid gets real hot really fast... need help would be willing to pay for some advice or help trouble shooting .. my cart is not stock and i cant find anything to help me trouble shoot thanks again for any help
Penguin is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-04-2010, 07:59 PM   #12
Not Yet Wild
 
Join Date: Mar 2009
Posts: 45
Default Re: solenoid not clicking

i have done some research i have a GE d392 motor ,a 700amp series controller i have replaced FNR switch new rogers586 noid my cart will not move in foward but reverse works great.. i swapped the cables on the FNR switch (the ones with rotating lugs) so that reverse is foward and vise versa same results no foward reverse works great.. the controller will humm in foward and the cart will try to move but thats it and cables gets really hot.. thanks for any help
Penguin is offline   Reply With Quote
Unread 10-04-2010, 08:21 PM   #13
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,043
Default Re: solenoid not clicking

With a conversion like this it is really hard to say without knowing how the thing is wired...... Sounds like you have a dead short in reverse. But when you swapped the two swiveling leads on the F&R, you still only had the one (same) direction? if that is so ..... the F&R is good and the solenoid is good.... I think the controller is okay and the pot is okay.... mark and disconnect all the motor leads and check for unwanted continuity between any S terminal and any A terminal... any continuity between any A & S terminal indicates a short in the motor.
scottyb is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Clicking Solenoid Electric EZGO
solenoid clicking Electric EZGO
HD solenoid clicking Electric EZGO
solenoid clicking, bad controller? Electric EZGO
solenoid clicking Electric Club Car


All times are GMT -5. The time now is 10:20 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.