|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-26-2010, 09:58 PM | #1 |
Not Yet Wild
Join Date: Jul 2010
Posts: 9
|
Floor Mat Templete- cutout
Decided to use a "Jute" rug to make a new floormat- what is the best way to cutout around the brake and go peddles? Trying to install without removing the peddles.....Thoughts
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2010, 11:18 PM | #2 |
Getting Wild
Join Date: Mar 2010
Posts: 81
|
Re: Floor Mat Templete- cutout
I thought about replacing mine with my rebuild, but I was certain I would have to remove the pedals so I decided not to, at least for now. Would be interested in what kind of reponses you get. Good luck!
|
09-27-2010, 09:32 AM | #3 |
Gone Wild
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
Re: Floor Mat Templete- cutout
You dont have to remove pedals to install a mat or rug. I use a large sheet of paper of any kind that is as large as area of floor neding covered. You can split reliefs around pedal area and then tape back after removal to use as a pattern for cutting rug material. Rug material will be MUCH EASIER to install than stiff stock thick rubber material.
When I install a stock mat on any cart I cut a slit from brake pedal to throttle that when instaling rotated around pedals, along with lots of silicone spray helps when sliding over pedals without damage to mat. |
09-27-2010, 09:48 AM | #4 |
Maybe This Weekend :)
Join Date: May 2009
Location: Lake Norman, NC
Posts: 6,411
|
Re: Floor Mat Templete- cutout
Like old mec said. No need to remove pedals. The gas is easy, the brake is the harder of the 2 for obvious reasons I ran a slit up to the steering colum to go around brake paedal. You cant even really tell. My 1st one I did was carpet and you couldnt tell.
I know its a ezgo but same princapal. [IMG][/IMG] |
09-27-2010, 02:38 PM | #5 |
Gone Wild
Join Date: Jan 2009
Location: south carolina
Posts: 160
|
Re: Floor Mat Templete- cutout
That's what I did on a mat CR and if you don't tell anyone, they won't notice!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
INSTALLING a new FLOOR MAT | Gas Club Car | |||
81 g1 floor mats | Gas Yamaha | |||
new floor pan? | Electric EZGO | |||
Cushman low speed cutout | Electric golf carts | |||
Floor Mats? | Golf Carts and Parts |